The moment has come for you to change your gas cooker hoses for the first time. For sure, you do not know what you are going to do, right? If yes, then you might want to resort for professional service. After all, there are lots of homeowners out there who would still want to get a professional installation even if they are familiar with the process of installation. This could be because they do not want to risk their lives, for they might commit even a little mistake, which could escalate to worse things and compromise their safety. Checking the Connection With the foregoing, there are few things that you need to check out before calling your installer of gas hose for cooker. One of these would be about your connection. Firstly, you need to make sure that there is still a live supply of gas within 1.5 meters from the location where you require the hose to be installed. This is also applicable even if you have a central gas heating system. If you have dual fuel cookers, then electrical connections should be within 1.5 meters, but not directly above it. You also need 13-amp supply if your gas cooker has ignition system. Space Considerations Further, there are also some things that you need to examine or validate before calling the service provider who will install the gas cooker hoses for you. For example, you need to make sure that they will have a clear access to your area or the location where you want the appliance to be installed. If there are stairs, then it is vital to check if there are some rooms that they can maneuver. Moreover, ventilation is something that should be present before your installer come in. Hence, you better check if there are enough spaces at the back and either sides of your cooker. Inspecting the Environment Furthermore, it would also be crucial to inspect your environment first. As a matter of fact, some installers of gas hose for cooker would also ask to you about this aspect as part of their standard operating procedure or SOP. Generally, there should be no combustible materials behind your cooker. Specifically, putting electrical sockets directly above and behind the cooker or gas appliance is a big NO. There should also be no power points, switches, as well as boilers and even alarm sensors there. Any flammable material should not be anywhere near your gas appliance too. Author Bio: I am Clair Woolner. I have lot of experience in writing about gas equipment, cookers, hoses and gas cooker hoses and kits etc.
Related Articles -
gas cooker hoses, gas hose for cooker,
|