Choosing the most suited drainage solution for your bathroom may seem like an easy task, but with the vast number of options and different types of solutions existing on the market nowadays, there are even more question marks form behalf of the puzzled clients browsing the web or visiting traditional showrooms. In order to clarify everything regarding the topic of professional and modern drainage solutions, here are a couple of the features to look for when choosing to redecorate your bathroom. One the one hand, a state of the art system must have modern lines and a sleek appearance so as to fit every posh and luxurious residence it is intended for. On the other hand, the shower drain must be extremely narrow, even as small as 12mm in width, in order to be truly considered top of its line, while still supporting the same large capacity of disposal water. Discarding the used shower water is an unpleasant and an unaesthetic procedure in traditional mechanisms, but with the contemporary innovations appearing on the market things have changed significantly to the better. The best shower drains have important improvements which range from odor-free solutions to a discharge capacity reaching more than 32 liters each minute. In order to see exactly how to install a powerful shower drain in your home, check out the following steps. |
Firstly, the most important aspect is to consider the location of the douchedrain inside the cabin. Afterwards, connect the drain to a 50 mm pipe, but make sure not to use glue or any poor quality materials. Link the douchegoot to a ground wire and route the wire underneath the level of the floor to connect it onto the earth manifold. Further on, place the drain on the surface of the floor or against the wall and ensure it is leveled accordingly.
Secondly, you must fix the drain. When creating the concrete, use as much or as less water as it is needed in order to make it firmer than usual. The top part of the shower drain has to be lowered by 2% in comparison to your tiles or floor pavement. Protect the drainage mechanism with sealant all around and open the pre-assembled curtain for sealing before pushing it into the sealant. This will create the watertight system you are aiming for. Insert the mounting foam into the draining space and you will prevent waste from entering in later on. Give it a clean and polished finish.
Finally, proceed to leveling the floor surface with the help of a leveling tool. The most suited slope is inclined precisely 2% in order for the water flow to be optimal towards its discharge system. Place the floor tiles as close as you can to the mounting foam. Continue by adding the silicone mastic gun in the space between the tiles and the shower tray. Lastly, removing the mounting foam and placing the specialized valve will allow you to insert the grid or chosen design element. Keep in mind that this design part of the mechanism has an adjustable height level so as to accommodate every possible space and desire of the homeowner.
For more useful information about douchedrain or about douchegoot, please visit this link.
Related Articles -