|
Belleville washers are one of the most confusing products on the market because they are not actually washers. Many people assume that they are based upon the name. However, they are actually springs. This means that you need to know what they are to determine if you need them. You will also need to know about your options to be able to purchase the right ones for your operations. It is easy to see how these can be confusing because the Belleville washers actually look like washers instead of springs. They have a conical shape and that a closer inspection, they are in fact a spring. They apply it flexible quality tool bolted joint and can be preloaded with energy. The main reason that Belleville washers are commonly used is because you can stack them in order to meet a variety of different load flexibility requirements. As you stack more together, you will gain more flexibility – and this can be one of the most affordable ways to meet your needs. You can choose to stack in a series as well as in a parallel configuration in order to either increase or decrease a load. If you are unsure of the configuration or if you need Belleville washers, you will want to talk to a supplier of springs. They will talk to you about the various options and take an in-depth look at your operations and/or your designs to help you make an effective decision. If you decide that these washers are necessary for your spring needs, you will need to look at the overall design to determine the material that they should be made from as well as the width that you will require them. In some instances, it can be more efficient for you to have them custom made. An engineer within the suppliers firm will produce what you require based upon all of your specifications. This ensures that you have exactly what you need without having to make any modifications upon receiving the washers/springs. The next time you see Belleville washers available, you will have a better understanding as to what they are and what they can offer you. They are in washers, even though they look like them. If you inspect them close enough, you will see that they are springs – and very unique ones at that. Take the time to analyze your operations to see whether they are right for you. If they are, you can always have them customized – otherwise you may want to look at torsion or compression springs for your needs. No matter what, you should always work with a qualified supplier. They will be able to provide you with a significant amount of information about springs, various materials and alloys, and customizations. A supplier should have an engineering department where you can talk about designs, specifications, and tensile loads. The more you can discuss about a project prior to ordering, the easier it will be to order with confidence knowing that what you get is what you need to complete your project and produce a quality product for your own customers.
Related Articles -
bellville washers, compression springs, coil springs, precision springs, wire forms, stampings,
| 
