How to Use LED Grow Lights |
LED grow lights, or Light-Emitting Diode lamps, are an increasingly popular choice for indoor plant growing principally because they can deliver more intense light output with less energy and heat production, and they have a much longer useful life than that of high pressure sodium, fluorescent, high-intensity discharge or incandescent lamps. Most grow lamps are used commercially and industrially, but some residential use occurs. LEDs are made in several colors to mimic the ranges of natural sunlight that drive maximum photosynthesis and plant performance. LED grow lights are also popular because they can be used in standard bulb fittings and do not require special ballasts or non-standard electrical fixtures. LEDs come in 2-watt to 15-watt equivalents and in a range of sizes and colors.
Instructions 1 Determine the optimal lighting requirements for your particular plant or plants to thrive if they were living outdoors. Figure out the intensity of light and for how many hours a day it is needed. Often this information is on the plant tag or little plastic pick stuck in the soil of your plant. Online garden resources can help you make the determination if your plant is unmarked. This is what you need to mimic indoors with LEDs. If your plants grow outdoors in shade they need less light indoors. If they are vegetables and grow in full sun for 14 hours per day outdoors then that is the bar you must meet in order for the plant to thrive indoors.
2 Provide a mix of red spectrum and blue spectrum LEDs. Plant photosynthesis is most responsive to these two spectrums. According to research conducted by NASA, mixing at least 80 percent red LEDs and roughly 20 percent blue LEDs is a successful ratio for growing plants indoors. You can easily switch out a few of the blue LEDs for white without harming the plant growth. This will allow you to see what's happening with your plants much more readily because white LEDs have a spectrum of green, yellow and orange, which is more easily visible to the human eye.
3.Adjust your LEDs to hang above your plant tops by anywhere from 5 inches to 20 inches, according to the plant's size and light intensity requirements. Your goal is to have the plant greens showered in light to their edges but not have the light spill or be wasted on surrounding areas where there are no plants. Height adjustment of lighting helps achieve this economy as plants grow, changing in both shape and size.
4 Determine if your plants require light and dark periods. If so, connect your LED lights to a timer to regulate their on and off cycles to save you time, worry and labor. If your plants prefer long daylight periods and short night periods, program the automatic timer for that length of light cycle.
Tips & Warnings High-power LEDs can cause serious eye damage if you look directly at them at close range. Handle lit bulbs with caution.
dm8000 hd wholesale led light usb flash drive usb flash drive wholesale usb flash drive flash drive manufacturer led lighting LED Wall Wash light LED video pixels LED Digital Tube light LED Spot Light LED Point Light LED Under-ground Lighting LED Commerical Lighting LED ba?ador de pared LED píxel de luz Tubos LED luz llevada del punto LED punto de Luz lenovo cellphone LED Spotlights Buried LED Iluminación Comercial ????? ????? ??? ????? ???????????? ????? ???????? ???????????? ??????
Power supply for DM500C DM500S DM500T Remote control for DM600PVR DM7000 DM7020S DM7025 Power Supply for DM600PVR DM7000 DM7020S DM7025 dm8000 hd
dm 8000 hd
dreambox dm7020 dm7020 HD dreambox 7020
Dreambox dm800 HD Se
dm800 hd se with Wifi
dm800 hd pvr
dreambox dm800 hd pvr
cheap dreambox dm800 hd pvr
Dreambox dm500S satellite receiver
DreamboxDM 500 OEM
Dreambox DM500C OEM
Dreambox DM500S OEM
Dreambox DM500Si Silver
Dreambox dm500Si black
Dreambox dm 518S
AzBox HD Elite
Related Articles -
led, light, wall, washer,