|
An amazing amount of technology and intellect has helped the world grow in almost every industry. I have been carpet cleaning in Friendswood TX for all of the local residents and businesses many years now. I speak from experience and knowledge. Aerodynamic developments have come a long way through research and the study of air flow. This applies greatly to the carpetcleaning industry because the recovery of all cleaning solutions, water, and soils are based on the amount of suction available. Just twenty years ago when all the machined parts of a truck mounted machine first came out most of the parts were not developed to optimize the air flow like today. As I mentioned before, we now have incredible vacuum tubes that help maximize the air flow. Every little part plays a roll from the cleaning wand at the carpet all the way to the exhaust of power plant truck mounted systems. Carpet cleaning wands have been developed so well that air flow is maximized. This reduces dry times of carpet. Teams on the cutting edge of tomorrow are all in a race to develop the most effective, light weight, and cheapest cleaning wands possible. Just about every carpet cleaning wand is available in a light weight version. With the development of metals, lighter, stronger, and more durable metals are available. Of course they come with a cost and that is why each product comes in multiple models. Then again there are cleaning wands such as that made by Evolution, made of plastic. After it flows through the hoses and makes an entry to the recovery tank at the van or truck, its runs through the system. The truck’s system enters, going through a huge recovery tank. This tank plays a major role in the air flow as well as it is only passing through separating the nasty and dirty water from the air. Having multiple filters with multiple hoses traveling out of the recovery tank allows the air to flow easier. Each of the elbows in the old machines has a tendency to slow down air flow just as well. Now machines are designed like performance headers of a car, to maximize flow and set the system free of restrictions. Forming metals into the exact parts we need have changed the world more than just the carpet cleaning industry. Let me explain how it has impacted my industry though. As I have already mentioned small engines and carpet cleaning wands, both of these use many small pieces of metal. Without the precise machining, welding, and stamping of metal, these parts would not be possible. Within a truck mounted system there is a blower, a heater, recovery tank, frame, valves, brass pumps, and many other metal parts. All of the quick connections on the pressure lines are machine brass parts cut and formed to perfection. A blower, commonly called a vacuum, is the part of our cleaning machines that produces vacuum and does all the sucking. It’s usually driven by the small engine on board. Just a small few companies make these parts though they are used worldwide for many applications. With all of these developments carpet cleaning for Friendswood Txresidents has become a faster, more effective, drier, economical, and less destructive. Thanks for reading about the technological developments in carpet cleaning. Hopefully you can understand how far the cleaning industry has come over the last three centuries. Read all four parts of this article to get the full story and learn more about the perspective of your local cleaners. I have been cleaning carpet in the Houston area for many years now and have seen some of the worst and some of the finest carpeted floors in town. I spend my time on a truck out at your homes servicing you for the most part. I am a certified textile restoration specialist but work on tile and natural stone as well. If you’re looking for the most professional carpet cleaner in Friendswood Txcontact me.
Related Articles -
carpet cleaning friendswood tx, carpet cleaning 77546, carpet cleaning friendswood, carpet cleaning, friendswood, 77546, tx, tile cleaning, upholstery cleaner,
|
