|
How to Use LED Lighting for a Video LED lights, light emitting diodes, work by converting electricity into light. LED lights are more durable than traditional fluorescent or incandescent lighting, and when turned on LED light panels provide a steady stream of non-flickering light, according to NAHB Research Center. LED light panels for video lighting can be an ideal way to illuminate a scene as these lights do not run hot and they provide an even glow, which is ideal for illuminating a subject. Instructions 1 Purchase the appropriate lighting panel for your use. The size of an LED light panel depends on how much of the subject you will need to light. A standard video light setup should have a medium-sized light panel with a smaller mini panel to counterbalance shadows. If you will be interviewing a person on video, a ring-shaped LED panel will cast an attractive glow on the subject without causing a white-out on the subject's skin. 2 Set up the lights. Use the larger LED light panel as your key light, which is the brightest light within the setup. Position the light as you would with a standard incandescent light, usually at about a 45-degree angle diagonally in front of the subject. Balance the light given by the key light by setting up a fill light. This light should be smaller than the key light and around 50 to 75 percent dimmer. Most LED light panels have a built-in dimmer, which does not alter the color of the light but simply changes its brightness. Position the fill light on the opposite side of the subject to remove shadows created by the key light. 3 Adjust the brightness levels of the LED light panels. Because LED light panels do not get hot, you can place the lights as close as needed to the subject without the fear of burning or whiting out the subject. Once you have positioned the lights and adjusted their brightness, call "Action" and let the magic of filmmaking begin. Tips & Warnings Purchase at least three different LED lighting panels. Depending on the shot you wish to create, you may need to place more than two lights on the subject. Set light angles and levels by referencing your video camera monitor to get a sense of how the subject looks on film. Do not simply set up the lights and begin filming. Take time to establish the light locations and play with the brightness levels of the panels until you have the ideal lighting situation. Dreambox store wholesale dreambox dm7080HD cheap dreambox DM8000HD led wall washer light led pixell light LED Underwater LightLED Spot Light LED Spot Light dm8000 DM7080 HD Dreambox DM8000 HD DM8000 HD DM8000 dreambox dm7020 HD 7020 HD DM7020 HD DM500 HD DM500 HD V2 Dreambox dm500 HD DM800 HD SE v2 dreambox dm800 HD SE V2 Dreambox dm800 HD SE V2 DM800 HD SE Dreambox DM800 HD SE DM800 HD SE wholesale usb flash drive wholesale leaf jewelry wholesale lenovo cellphone Dreambox DM7080HD decoder DM7020HD V2 DECODER DREAMBOX
Related Articles -
china, led, light,
| 
