Before you begin Cork flooring installation process, you need to do some inspection. You will have to look at the planks in the light of the day in order to find out whether they are any visible damages or faults that may need to be addressed. In addition, for you to have the best cork floor, take time to examine if the condition for the site, subfloor in this case complies with the professional requirements. In the event that any of these seems not fully satisfied, do not go on with the process since it will be a waste of time and resources. |
Just like any other job to do with construction, you purchase the right tools. The boughtequipments have to be in a good condition so that they do not give you a hard time since the process is not that demanding. Some of the tools that you will not afford doing without include the electric although you can have the jigsaw in its place. You also need to have the setsquare for measurements and the pencil for marking. Possession of the PE film and the adhesive tapes can also be of great assistance to you.
First, the room has to be in the right angle when compared to the planks. The final row for the planks should preferably be having measurement equal to 5 cm for the width. Cutting the planks in the first row into a small size will be the best decision to have an attractive floor. In order for you to obtain the bend of shades that is pleasant for Cork flooring installation, you will have to get the planks shuffled. The main direction of light should be used as the basis of laying them so that you have the best results by the end of the process.
It is advisable that, you lay the wooden type of floor crossways on the floorboard that is existent. Do not have the planks screwed or nailed on the floor since it will not bring a good appearance to your room. When you are fixing the skirting boards make sure that they do not restrict the movement that should take place on the floor. A decision to have the sticker stack planks will require that you have them at room temperature for a period of about 72 hours before you go ahead to have them installed. This helps in dealing with issues of expansion and contraction that are likely to get you floor losing the right shape it had when you were doing it. On the hand, the room temperature has to be around 65 degree both before and during the exercise. It is not the case do not be in rush to have your work done in a shoddy manner when you can wait for a day or two.The expansion gaps have to be provided on the Cork floor. You can have about 10 mm to the walls or any other objects fixed permanently. When the room exceeds 100m 2, you need to leave bigger gaps.
Cork flooring installation http://cancork.com/Forna_glue_down_cork_tile_installtion.html activity is a simple process but you must follow certain required steps. You should begin by inspecting the state of the room before determining whether it is in the best state for you to go on. If don’t know how to do this, then get the help from Cork floor experts. Once you have confirmed this and you have the right tools, you are good to go.
Related Articles -
Cork flooring installation, Cork floor,