Certain windows and sets of windows call for something other than a right-out-of-the-box treatment. The space may need a tailored approach, either because of some settling in the foundation (particularly in the case of older houses) that has resulted in a window frame that is out of square. Or the space may be a special hideaway that you’d prefer to adorn with something made by your own hands. You may also simply want to fashion a unique shade from a bolt of fabric that’s been captivating your attention for a while – but for which you haven’t found just the right use. To achieve the look and feel of a Roman Shade, try following these steps, courtesy of Martha Stewart: First, measure the fabric to fit the entire inside area of the window. Add a few inches to the overall height in order to accommodate sewing channels at the top and bottom of the shade. You will also want to allow for an extra inch at the sides for sewing side seams. Then, machine-sew the seams and hems of the shade, and insert tension rods through the channels at the top and bottom. When you’re ready to install your shade, simply get the top rod in place and then adjust how much light comes into the room by experimenting with various placements for the bottom rod. It’s extraordinary how much of a difference such a DIY project can bring to a room, especially a space that already has its own character and just needs an extra touch to complete the look. Because of the simplicity of this project, you may find yourself changing out the shade fabric in that special window one or more times every year. Once you have the basics covered and the rods in place as you’d like, it’s much easier to swap out one design for another. For more information: http://www.halfpricedrapes.com/shades.html
Related Articles -
window shades, custom window shades,
|