Coating a good quality Bitumen Emulsion on the roof provides immense benefit to the roof. It not only keeps the original roof surface intact, but offers an effective protection against heat and water leakage. There are various combinations available with varying degrees of reflections, setting time, toughness and adhesion. Apply this wonderful solution that sustains and maintains the quality of construction. There are plenty of manufacturers that bring a long list of coating systems to choose from. It creates a seamless coating that gives an excellent protection against the odds. The coating is compliant with the codes and conservation norms. How to improve the performance of Bitumen Emulsion? Bitumen is an incredibly effective substance in thermal and water protection. However, it is possible to increase the strength and capability of it. Experts say that the strength of it depends on the quality and composition of the mixture it is mixed with. The way mixture is laid down on the surface and how well it is mixed before applying are two other critical aspects. It is always better taking help of a consultant before choosing a composition. • Hot Bitumen should not be exposed to the air for a long time. It hardens and loses adhesive property after reheating. Melt only the required quantity. • It has to be mixed with the aggregate thoroughly and rigorously. The mixture should be used immediately after mixing. A ‘stale’ mixture loses all its vigor and adhesive property. • Bitumen is a waterproofing substance. Hence, do not let it come into contact with water after melting. It causes foaming. • Store Bitumen as per recommendations on the pack. Carelessness in storage causes degradation of its quality. • Petroleum-based solvents should not be mixed with it because they reduce the viscosity. • It is important to maintain the right proportion is highly important while using Bitumen Emulsion with the aggregate mix. The quantity of Bitumen depends on the texture and cohesion of the mixture. If it is in an excess quantity, then the mixture loses the stability due to the reduced friction. Optimal friction is achieved only when it is in optimum proportion. It is advised to mix it gradually after testing the cohesiveness and stability at various levels. • Keep the temperature optimum. Overheating reduces its elasticity and underheating result in a heterogeneous mixture. Bitumen Emulsion is a versatile substance that is useful in a variety of domestic and industrial usage where high-level thermal and water insulation is desired. The bitumen companies in India use petroleum byprooducts to make bitumen emulsion.
Related Articles -
tar petroleum, bitumen emulsion,
|