Tiles have increasingly become a preferred flooring material because of their aesthetic value. In addition, they are resistant to moisture, easy to clean, durable, and come in different colors and styles. That is, colored durable floors dramatically transform the home by increasing the beauty of the home. Even then, to maintain this appeal, tiles require regular cleaning with appropriate methods and chemicals. Thus, it is advisable that you avoid using chemicals on your tiles without professional guidance. Tile cleaning and sealing is not an easy task especially if a vast area of your floor is tiled. In fact, this may call for the use of a machine or enlisting the services of residential cleaning services in your area. These companies are usually equipped and have cleaners who understand the procedures involved in restoring the beauty of your tiles. Although tile and stone cleaning is a great investment, it can be quite costly. Therefore, tile and stone sealing is recommended especially if your surfaces have seen better days or they just get dirty often. A tile and stone sealer will protect your surfaces from general dirt as well as spills. Moreover, with sealers it is more easy to sweep and difficult to stain. Thus, sealing is good if you intend to maintain your tile or stone showers for a little longer. Sealers come in two varieties; topical sealers and penetrating sealers. There are also combo sealers comprising both penetrating and topical sealers. If you are going to apply sealers to your tiles or stones, here are some important factors to keep in mind for better results: · Ensure that the target floor is clean – Be sure to use the right cleaner. That is, be sure the cleaner is meant for tile/stone use to avoid damaging the surface. The use of the wrong cleaner can be a costly oversight. You also need to be keen on following the manufacturer’s instructions on the dosage as this varies from one manufacturer to the other. Always use a soft brush when cleaning counter tops, walls and the floor. Most importantly, refrain from covering a big area at once so that it does not dry up before you finish and rinse. · Watch out for stained areas – If you notice any stains after cleaning the surfaces, you can soak the affected area for a while before cleaning it out. If need be repeat this process until you achieve the desired results. · Apply the sealer – Once you are through with cleaning, you can give your floor up to 4 hours before applying the sealer. In most cases, the sealer can be poured on a large tray from where it will be applied on the floor. It is advisable to start from the furthest point advancing towards those areas that are close to you. The application process must be even so that there are no puddles left behind. In summary, proper care and maintenance of Tile and stone cleaning may require professional stone cleaning and sealing services that will not only ensure longevity but also help maintain aesthetic value of the floor.
Related Articles -
home improvement, tile cleaning, sealing, stone cleaning, cleaning,
|