|
With winter on the way, there is no doubt that heaters are going to be important sooner than you realize. For people who live in Minnesota, winters are cold and dreary which makes having an efficient heater incredibly important. If you think yours might need an update, you might want to consider taking a look at the different types of gas central heating systems in Minneapolis. While the standard certainly is forced air, it's not the only option and, in fact, one of the others may be better for your lifestyle. Before you call a company to come and install a system, here is some information on the most popular types and their pros and cons. Forced Air Systems Without a doubt, the most common type of gas heating system is forced air. This system is so popular because it uses the same venting system as your central air conditioner; it's a "two birds with one stone" kind of deal. Besides taking advantage of your existing ventilation system, these systems are among the most efficient available. While efficiency depends on the type of furnace and other factors like windows, you can't dispute that they put out a lot of heat in relatively little time. Things to Consider If you decide to install a forced air system, you should be aware that it will significantly dry out the air in your home. As you can probably guess, blowing hot air into your home will zap the moisture. Luckily, in places like Minnesota, there isn't a lack of humidity which might make this kind of system perfect for your needs. Another thing to consider is that no matter how efficient your system is, there will probably be air leaks from your vents, doors, and windows. The pressure differences created by a forced air system itself make it almost impossible to completely prevent these kinds of leaks. Hot Water Systems Another type of heating system that is gaining popularity is hot water systems. In a hot water system, gas is used to heat water in your hot water tank which is then pumped to various places within your home. While older versions of these systems are manifested as radiators, things have gotten significantly more advanced in recent years. One of the most common ways to use hot water heating is with base board convectors and radiant floors. Things to Consider These systems offer some awesome comforts. Imagine never stepping onto a cold floor again! These systems also help the air in your home retain moisture since they don't blow hot air through your vents. When it comes to efficiency, these systems are on par or better than forced air systems since they don't require vents and don't create pressure changes inside the house. The downside, of course, is that you will need to install an entirely separate system for your air conditioning. Steam Heating Systems A third option you have is steam. Steam systems work kind of like hot water systems. They use gas to boil water to such a high temperature that it turns into steam and disperses itself through pipes. This type of gas heating system is not nearly as popular as the other two because it tends to be inefficient. The inefficiency of this system comes from the fact that water must be super-heated to create the steam necessary to warm a home, which means your energy bills are going to be much higher with no additional warmth. Once again, putting this kind of system in place also means that you will need to install an entirely separate system for your central air conditioning. For more information about gas central heating systems in Minneapolis, contact a professional HVAC company near you! Apollo Heating and Air Conditioning 24 Hour Emergency Service is just a phone call away. This makes Apollo Heating and Air Conditioning the obvious choice. Visit our page on http://www.callapollo.com to see our page today!
Related Articles -
gas, central, heating, systems, minneapolis,
|
