|
Your swimming pool does a lot of things: it adds value to your home, provides hours upon hours of entertainment for you, your family, and the neighborhood, and gives you a way to cool off and relax on days that are just too hot. As most pool contractors in Fort Worth can tell you, your pool might not be doing any of these things during the off-season when you have it covered. To make sure that your pool is able to pick up where it left off once you start using it again, you need to know how to take care of it in the off-season. With that said, read on for some of the most important tips and tricks to take care of your pool when it's not in use. Keep the Cover in Good Repair There are different ways to take care of your pool cover depending on what type of cover you have. There are many types of covers, but 3 of the most popular are water tube covers, LOOP-LOC® mesh safety pool covers, and solid vinyl winter covers. - Vinyl Water Tube Covers: If you have a vinyl water tube cover over your pool, then you should be sure to replace any water tubes that have broken before covering your pool during the off-season or when you are not using it. Always make sure that you have extra tubes in storage so that if any of them break, you can quickly replace them.
- LOOP-LOC® Mesh Safety Pool Covers: If you have a LOOP-LOC® mesh safety pool cover, then you should be aware—if you are not already—that the springs and straps on your cover will start to stretch as soon as you install the cover the first time. You will therefore need to adjust your springs and straps occasionally, especially when your cover is new.
- Solid Vinyl Winter Covers: Just like LOOP-LOC® mesh safety pool covers, the straps on your solid vinyl winter covers will need to be re-tightened and adjusted throughout the season. Not only will the straps stretch slightly as you use them, but the cover itself will start to stretch after initial installation. Be assured this is very normal and you will just have to remember to tighten the straps as necessary to suit.
Keep Your Pool Cover Clean Leaves, dirt, and other debris can fall on your pool cover any time of year. As it rains, water can collect and stay on your pool cover as well. Make sure to remove any water or debris and dirt that accumulate on your pool cover as soon as possible. Having these things sit on your cover may not seem like much weight, but it can definitely put undue pressure on your pool cover, and may compromise the integrity and durability of your cover. Do Not Place Heavy Items on the Cover One mistake that many pool owners make about their pool cover is to place heavy items on it, such as rocks, cinder blocks, and bricks. This is usually done in order to keep the pool cover from blowing off and away on windy days. However, this is really a bad idea since it can actually cause the cover to fall into the pool, pulling the objects on top of the cover into the pool and causing damage to the pool itself. Knowing how to properly maintain your pool cover and repair it as necessary will ensure that your pool continues to add value to your property and be a safe and enjoyable amenity for you and your neighborhood. Talk to pool contractors in Fort Worth about these and other preventive maintenance tips to make sure that you get to enjoy your pool when summer is on by taking care of it during the off-season.
Related Articles -
Pool, Contractors, Fort, Worth,
|
