Depending on where you live, you may be in the beginning of winter. If you look outside and there is snow on the ground, the last thing you are probably thinking about is your sprinkling system. When the weather is cold you may have the time to evaluate your irrigation system and its performance during the last summer. Hopefully you were able to close everything down properly before the weather turned bad. You can now develop a plan to get your system up and running quickly, so you’re ready when spring arrives. There are many steps that you can do on your own. If you find that you do have some things that need to be fixed, you can reach out to a company that does irrigation system repair in Alexandria or wherever you reside. Steps for Activating Your Sprinklers in the Spring - You may be excited at the first signs of spring and be rushing to get everything set up and ready to go. You want to first make sure that the weather is really going to cooperate. You need to be sure that the ground is not still frozen. Take a shovel and verify that the soil at 1-foot deep is frost-free. That is the depth your sprinkler pipes are buried, and you don't want to run any water through them if the ground is not ready. If you do, you will most likely cause some damage to them.
- You are next going to want to take a look at your control box and the programs you have set up. You may need to start by cleaning up around the area, removing cobwebs, dust and things that have managed to be stacked around it. Check the date and time and determine if the settings are still correct for the areas you will water. You may also want to replace any battery backups at this time.
- You will want to walk through your whole system and evaluate the condition of the sprinkler heads you have been using. The spring is the best time to replace them when you are thinking about the system in general. Over the winter you may have had some additional damage due to snow removal, or the weather may have taken its toll on your sprinkler system as well. While you are looking at your system, you will also want to take a look for any items that might obstruct the water flow. You should move any rocks or dirt that have gotten in the way of your heads. You should also take the time to actually clean the heads as well to remove and debris.
- When you turn the main irrigation supply line on, do it slowly. You want to hear water begin to run, and then it should stop. If you continue to hear running water then you may have a valve open somewhere. You will want to check and close any open valves you find so that you can get the system ready to go. Charge the main irrigation line for several minutes. Once all is set, and you see no visible leaks, then you can run through each zone to make sure all is in working condition. Then you will be ready to go!
This process does take a little time, and you do want to carefully check all areas. If you do run into something that needs to be fixed, or you just feel like you don't have the time, you may want to call an expert. Reach out to a professional in irrigation system repair in Alexandria or in the town that you live and have the professionals help you.
Related Articles -
Irrigation, System, Repair, Alexandria,
|