HVAC systems combine heating, ventilation, and air conditioning into one simple appliance. They are quite convenient, and fairly easy to maintain. However, if they aren’t maintained correctly, utility bills can become frustrating and expensive with these systems. Here are some ways to increase the efficiency of your HVAC system. Air Leaks Air leaks in your house can greatly increase how hard your HVAC system has to work to properly heat or cool your home. These air leaks are most often found around doors and windows. This is especially true for those who live in older homes that haven’t been renovated, or have aged windows or doors. Replacing these doors and windows with new ones that are better insulated can help lower your utility bill and make your home more comfortable. If you feel like you keep turning up the heat or the air conditioning and your house is barely affected, you can start investigating for possible air leakage in your home. Clean the Filter Keeping the filter in your HVAC system clean can really affect the efficiency. The filter keeps particles and dirt from entering the evaporator coils. Without this filter, the particles would build up on the coils and eventually, it would cause the appliance to fail. With a dirty filter, the HVAC system has to work harder to pull air in because of the resistance from the particle buildup. Keeping the filter clean is a much less expensive solution than replacing evaporator coils or paying more to use the appliance. A dirty filter can also cause some air pollution in your home. Most HVAC systems have filters that you can remove and clean, and then return it to the appliance once it is dry, but you can also buy a completely new filter to replace the old one. Free of Debris Much like keeping the filter clean, debris buildup on or around the HVAC system can reduce its efficiency. Vacuuming out the inside of your HVAC can help a lot with the buildup of dead leaves or other materials, especially with the change of seasons. It’s suggested that you clean and maintain the area around your HVAC system, as well as vacuum it out a few times a year. Keeping the inside and outside of the appliance clean and free of debris can increase the efficiency and prevent some major problems. Insulated Ducts Insulated ducts really help keep air from leaking before reaching the desired space. Sealing leaky ducts can help alleviate this problem, but insulating them can also save a lot of money in the long run. Insulated and sealed ducts are able to deliver a lot more cold air, which means you don’t have to run your HVAC system as often to get the same effect. This can save a lot of money on your utility bills, and possibly even lengthen the life of your HVAC system because you aren’t using it as much. If you do not feel comfortable sealing or insulating your own duct system, there are professionals that can help with your HVAC in Minneapolis, and many other areas. HVAC systems are very convenient, but they can seem to be expensive if they aren’t well maintained to increase their efficiency. Insulating leaky ducts and keeping the HVAC system and area around it clean can help a lot with utility costs. You can also find possible air leaks in your home to make sure you aren’t running your HVAC system in vain. Replacing or cleaning your filter is a good way to increase the efficiency of your appliance. If you’re system requires a new filter, you should be able to find retailers that will sell you a filter for your HVAC in Minneapolis.
Related Articles -
hvac, minneapolis,
|