|
A broken heat pump can put a damper on your pool party. When you notice your pool heat pump not heating in Ft. Myers, don’t panic. Instead, call a professional to come to your home to make repairs right away. Although you don’t want to risk damaging the pump further by fixing it yourself, it doesn’t hurt to learn some reasons why heat pumps break. Check the Pool’s Thermostat and the Pressure Switch All heated pools have a thermostat switch with the sole purpose of controlling the temperature. The best case scenario is that you simply have the thermostat set wrong. The worst case scenario? The thermostat has broken and needs to be replaced. If the thermostat is set correctly, check the pressure switch. The job of the pressure switch is to ignite the heater. Clean Your Filter Yes, a dirty filter can cause heating problems. Filters on most pools should release pressure of at least 16 psi. A clogged filter will work harder to release this pressure and may cause other components of your pool’s system, including the heat pump, to fail. If you clean the filter and the problem isn’t resolved, call for repair service. Check Your Gas Valve Gas-powered pools have a valve that needs to be turned on at all times for the heating mechanism to work. If the valve is open, check your fuel supply. Low fuel can cause the heater to work sporadically or inefficiently. Obviously, no fuel will leave you shivering in the water. Observe the Pilot Light A pilot light that doesn’t light or stay lit may be an issue with fuel supply, but there are other problems that can affect the pilot light. For example, poor venting and inadequate air supply are two circumstances that can cause issues. Have a repair service check these components of your pool’s system rule out any other problems. Examine the Heat Bypass A pool’s heating element is not designed to take on an excessive amount of water. When the element floods, it will stop working. To prevent this from happening, a heated pool has a heater bypass. The bypass’s job is to move unheated water away from the heat pump. If the heater bypass is damaged, this can lead to pool pump problems. Evaluate the Heat Pump for Water Corrosion Just because your pool is filled with water doesn’t mean that all its parts can handle the moisture. Rust can form in a pool and affect its components. Pool owners of older pools are usually at a greater risk of developing water corrosion. If this happens, replacing the damaged heat pump is the only option. Hire a Pool Repair Professional Pool repairs can be expensive. That’s no joke. However, many times repairs skyrocket because problems were either ignored or a homeowner decided to try to make repairs they aren’t qualified to make. Save yourself money and frustration by hiring a licensed pool repair technician. By attempting this work yourself, not only do you risk damaging your pool further, but you could put yourself in harm’s way. So, how do you find a qualified repair service? Visiting local pool supply stores is a great start. You can also look online for repair companies near you that offer free, on-site estimates. You don’t have to live with a chilly pool. A heated pool doesn’t have to be a luxury you live without. You simply need to find a qualified professional to help you as soon as you realize your pool heat pump not heating in Ft. Myers. Many pool repair companies are available around the clock, 24 hours a day to answer your most urgent calls.
Related Articles -
pool, heat, pump, not, heating, ft., myers,
| 
