Here are some of the common RV awning repairs in Lafayette and the step-by-step guide on how to complete them. Replace the Torsion Assembly The torsion assembly is made up of a spring, end cap, and cam lock mechanism. It's held in place by 2 rivets. Start by freeing the torsion assembly by removing the rivets. Line up the new torsion assembly with the marks from the old rivets. Once the torsion assembly is in place, make new rivets using a screw driver to secure it. Substitute the Fabric If the fabric gets ripped, torn, or faded, it's a good idea to replace it with new fabric. To remove the fabric, start by taking off the torsion assemblies. Then, slide the fabric off of the awning tube. Unroll the fabric by hand while turning the awning tube. After removing the old fabric, install the new one onto the awning tube. Work to keep it centered, and tuck the cord ends into the tube. Release the Spring Tension When working with the spring tension, it's vital to use extreme caution. The spring has considerable force that could break a bone or make deep cuts in skin. It would be wise to have professional assistance with these repairs. The professional will use a vice grip to firmly clamp the awning arm. Another person will remove the bolt holding the awning arm in place. Then the awning arm should be moved out of the way to remove the cotter pin. With the spring clear, it can be unwound to release the tension. When completing any of these or other RV awning repairs in Lafayette, it's important to have the proper tools and knowledge of how to complete the work. If not, there could be further damage to the equipment or to those working on it.
Related Articles -
RV, awning, repair, Lafayette,
|