Pressure washers are the fastest way to do a lot of cleaning in a short period of time. They’re also a great way to strip away the old gray outer layer of your deck and restore it back to its true color. However, many homeowners worry that the force of the water may be too powerful for a wooden deck. It’s true that if you don’t use your pressure washer correctly, you can create deep gouges in the wood. However, as long as you follow these precautions, you should be able to clean your deck safely with a high pressure washer in Brunswick, GA. Choose the Right Pressure Washer One of the big decisions you'll have to make when choosing a pressure washers is the right amount of PSI (pounds per square inch). This is how much force the water has--the higher the number, the higher the pressure. Choose the lowest pressure you can, especially with soft woods like pine. Also be sure to choose the right tip or nozzle, since this also affects the pressure. Most people find that a 20-25 degree nozzle works effectively without causing damage. Use the Right Technique When using your pressure washer, hold it at least a foot away from your deck. Keep it moving gradually, never resting too long in one place. Try to move across the deck as evenly as possible to avoid etching cleaning lines into the wood. Test Your Pressure Washer Before using your pressure washer on your entire deck, test it on a small, out-of-the-way section. Choose a board that will be easy to replace if the pressure is too strong and the wood is damaged. Once you’re sure that you’ve chosen the right high pressure washer in Brunswick, GA, and know you have the technique down, it should be safe to use on your entire deck.
Related Articles -
high, pressure, washer, Brunswick, GA,
|