|
Stainless steel tanks are ideally suited for storing liquids in industrial settings where the need for long term storage tanks may require the manufacture of a bespoke tank. Getting steel tanks fabricated for pharmaceuticals and food processing and other storage facilities requires some research into finding a competent and reliable company. You need to find a company that prides itself in producing high quality, cost effective steel fabrications. Look for a company that can work from AutoCAD or other 3D modelling software to produce detailed drawings. Their fabricators can then fabricate products to the exact design detail. Other essential factors involve having the ability to visit onsite to discuss your requirements and needs, as well as completing a site survey and providing a design to suit your needs. They should be keen to provide a simple and value for money product, which will fulfil your needs. The bespoke manufacture of custom storage tanks are mainly used for the chemical, pharmaceuticals and food processing industries although are also used in many other industries. Solvents and in fact any kind of liquid can be stored in fabricated stainless steel tanks and vessels. Make sure you get a guarantee that the product will be made and conform to customer specification and finished for your requirements by the fabricators. Your exact requirements should be discussed in detail and if preferred most fabricators can work from your plans once they have been approved. In general bespoke tanks & vessels do not tend to conform to a one of a kind shape either vertical horizontal rectangular or capsule. Although this varies widely. As they are bespoke the tanks can be created with varying capacities from 50 Litres to 130,000 Litres in stainless steel, aluminium or mild steel. Bespoke Steel tanks and vessels made to match customer's requirements including Water tanks, holding tanks, mixing vessels, storage tanks, silos, and steel filters. Steel Installation Installation of manufactured products needs to be carried out using the minimum disruption to other site activities by knowledgeable installation teams. Planning in accordance with the relevant Health and Safety legislation prior to the installation has to be their priority. Look for a company that also provide the re-work, re vamp or retro fit of all the above products that they manufacture. For extra peace of mind look for companies who have accreditations such as British Standards ISO 9001, CSCS- constructions skills certification scheme, safe contractor, and SEIRS - storage equipment installers, as these will offer the additional reassurance prior to any initial contact that they have undertaken to ensure they have trained and refined their staff and processes to nationally approved standards. Once you have selected a Steel supplier remember to check again that they offer exactly what you require. Perhaps by telephone or email enquiry via their website at first to establish a line of communication. Always try and get references from similar work undertaken by any potential new supplier, so you can understand the company's method of working and if the outcome was satisfactory. Another thing to be aware of is that there are many websites selling used tanks. Which may appear cheap at first, but will they suit your requirements? If the vessel is to be used in manufacturing will it fit the site area? If not how much will it cost to have it altered? What was it previously used for? Consider the use that you intend it for and ensure you are not going to risk any kind of cross contamination.
Related Articles -
Steel, fabricator, fabricators,
| 
