|
Scaffold design is a very important detail in scaffolding use. Your safety and well being depend on the specifics of how the scaffold is designed. It really all comes down to three main components of the design. These fundamentals are essential and should be kept in mind before attempting to assemble a scaffold. The three most vital components are specific requirements for the scaffold, details of the platform, and rudiments for the guard rails. In order to understand Scaffold design, you need to have some knowledge of specified requirements needed to assemble it. The first of these requirements is that it must be strong enough but also capable of holding the desired weight. If it is not able to handle the weight you incur on it then it has the possibility of collapsing and workers getting hurt. You also must be cautious of your lumber. You should make certain that it is good quality lumber and that should any pieces break, get burned, or are other wise damaged that it is swiftly replaced before its next use. Also remember that the scaffold is only as strong as its weakest point. Any suspended scaffold design must have four points of contact. The crane must have a safety latch and shackles to be completely safe. The next main point in Scaffold design is the platform. The platform should be made with no less than two by ten lumber and it should be perfectly level. If the leveling of the platform is off, even in the slightest than you risk the possibility of workers losing balance and consequentially falling from the scaffold. The last fundamental of scaffold design is the guard rails. Guard rails absolutely must be incorporated into the scaffold design if the scaffolding goes beyond five feet of the design or if the scaffolding is near any amount of water. As far as measurements go, the top rail should be 42-45 inches high. The midrail should be half way between the top and the bottom rail. And lastly, the material used in the actual scaffold design must be two to four inches of flat bar or pipe and they must be securely in place. The three main fundamentals to scaffold design are specified Scaffold requirements, platform details, and essentials for guard rails. If you apply these fundamentals to your design then the scaffold will be efficiently sturdy and especially safe. Your design will be an exceedingly productive scaffold.
Related Articles -
Scaffolder, Scaffolders, Scaffolding,
| 
