Interior finishes are available in several varieties like Acrylic, MDF, Hi-Gloss Laminates, Duco Paint, etc. Each of these finishes has some better qualities and some limitations. |
It largely depends on the preference of your interior designer which one he chooses. Nowadays, people give preference to appearance and finish rather than durability.
The modern trend is to change the interior every five years. As the costs of interior designing come down, it doesn’t put an excessive burden on the budgets.
Interior designers in Yelahanka do a comparative analysis before narrowing down to one or two choices.
What are different choices and their plus points?
It is available in 1mm thick sheets which are stuck on plywood or MDF. There are readymade sheets also available which can be cut into required sizes. Just by applying edge bands of matching color, you get the finished product ready.
Interior designers in Yelahanka prefer using pre-laminated sheets due to great finish and durability. However, Acrylic is not the best choice when
• The design contains several profiled shutters
• There are many “no straight line” applications
Hi Gloss Laminates
You get several brands of Hi-Gloss Laminates in India. All are equivalent in durability, performance and price. Standard or high scratch resistant variations can be chosen as per the availability.
Here also, Interior designers in Yelahanka prefer pre-laminated sheets. Factory mad sheets are always better because they give long-lasting service.
The material is ideal for the plane and straight line applications. Also, it catches finger marks pretty easily. Also, the surface is prone to get scratches.
Though high scratch resistant variation is there, the color choices are very few.
When high gloss finish is needed, duco paint is the best alternative. It is the same glossy enamel paint seen on the motor vehicles.
It works great on all kinds of surfaces; curved, non straight line and angular. It can be applied using a sprayer on the prepared surfaces.
You can apply it on plywood also, but it goes well with MDF because of the smoothness of the surface. Nowadays, some designers paste a thin sheet of MDF on plywood and then apply Duco Paint.
However, it cracks on the joints. Therefore, Interior designers in Yelahanka keep as few joints as possible in the design when they choose Duco Paint.
Your designer would pick the right product to renovate your home or office.
Contact the best interior designers in Yelahanka, who as the lot of experience in interior designing and decorating of kitchens, bedrooms, living rooms etc.
Related Articles -
interior designers, interior designers in yelahanka,