So let’s say you have just finished installing a new garage door and you want to make sure that it stays in a perfect working condition for as long as possible. Well, there is no way to guarantee that the door will continue to work as it does now for the rest of your life. Almost every garage door encounters a couple malfunctions over the course of several years. In some cases the owner of a given garage door will remove the malfunctioning one and install a new one for several hundred dollars. However, you do not necessarily have to buy a whole new garage door and go through the entire process of installing it once again, instead you could try and fix the old garage door – and that is why you will need a basic guide to fixing garage door malfunctions. Once you are done reading this post you will know how to fix several garage door malfunctions quickly and prevent them from occurring again. |
The most common problem that occurs in garage doors is that the gears get stuck for some reason and the door won’t open. It can be quite frustrating to encounter this problem especially when you are in a hurry because if the garage door won’t open that means that you won’t be able to get your car out of the garage. However, there is no need to panic all you need to do is tackle the problem logically; look for a red switch, button, or string located somewhere near the electrical box on the roof of the garage. If you installed a typical garage door you will have several different components on the roof of your garage which allow the garage door to slide up along the ceiling when it opens; the electrical box is not hard to spot. Once you find that button or string, pull it and hopefully the door will open. If that method does not work and the door still does not budge you can try reaching under the door and pulling up with your body strength while someone presses or pulls the red string to open the door. If the door still does not open after you tried the above two mentioned methods of opening the garage door you will need to call a mechanic because the problem is likely a malfunction in the electrical box which is not allowing enough power to get to the motor which opens the door.
The red switch, button, or string that we mentioned earlier is the override switch. In other words, once you pull that the door will be forced to open. It will almost always work to get the door open but sometimes the switch or string will be frozen or it won’t budge no matter how hard you pull it. When this happens you will need to open the electrical box and try and defrost any frozen components. Either way, using the override problem will usually get your garage open or you will be able to get to your important appointment on time.
If you are looking for garage doors Brisbane then you are in the right place, just follow the link and also know about roller shutters Brisbane.
Related Articles -
garage, doors, Brisbane,