The Granite Countertops Toronto ProcessGranite countertops are a beautiful way to finish off your kitchen or bathroom. As a consumer, you simply select your granite slabs, the granite colors, and have the professionals install it for you. But the process is actually more involved than that, as will be explained. Granite countertops Toronto can make this process as simple as possible for you, the consumer, when you consult GraniteCountertops-Toronto.com to supply and install your countertop for you. Making the Process of Installing Granite Countertops Easy For YouGetting the granite from its natural state to installed in your kitchen or bathroom is a very involved process. This process begins in a stone quarry where large blocks are cut out using a variety of cutting and sawing techniques. A core drilling technique is usually performed in conjunction with a "blasting" technique in order to cut the large stone blocks. The next phase in this granite countertops Toronto process takes place in a "gang" saw plant, where the large blocks of stone are cut into anywhere between 40 to 60 granite slabs of various sizes using a gang saw. After these slabs have been cut out, the stone is then taken to a polishing line, where the slabs are grinded down from their rough state, and then polished. Once these granite slabs have been polished, they are shipped all over the world into warehouses where wholesalers then sell these slabs as the basis for granite countertops in Toronto, like GraniteCountertops-Toronto.com. Granite Countertops Toronto - From The Warehouse to Your HomeFrom this point on, consumers can visit the granite showrooms to select their granite colors that they desire, then the company will go to your home to take measurements of your cabinets. Back at the warehouse, the granite slabs of choice are cut to exact measurements for your cabinets. The entire countertop - including the edges - is grinded down and polished. The countertops are then ready to be installed in your home! Installation of these granite countertops in Toronto requires a little bit of physical labour and experience, which professionals like GraniteCountertops-Toronto.com are fully capable of. These slabs need to be brought into the home with care, since they are very heavy and can cause damage to the home if not handled properly. Once the slabs are fitted onto the cabinets, the joints are put together using epoxies. You will then be able to enjoy your new, shiny granite countertop!
Related Articles -
home improvement, renovations, granite countertops,
|