For centuries, people have attempted to cool the places that they have lived in. Egyptians used windows placed in the ceiling with wet reefs on top that let in cool, humid air while the water from the reefs evaporated. Romans in ancient times circulated water through the walls of homes and other buildings. These methods, however, are outdated and do not work as well as Calgary air conditioning methods used today. Most air conditioners use a refrigeration cycle, but a few also evaporate water. What kind that a home uses depends on several things. However, knowing what ones are available will likely help a homeowner decide. If only one room in a home needs to be cooled, the most common type of Calgary air conditioning that is used is the unitary system. This is a cooler that is placed either in a window or through a hole in the wall made specifically for them. There are controls that protrude into the inside of the home, and the rest of the machine jets outside. Unitary systems use evaporation methods to cool the inside of the home while simultaneously blowing hot air outside. PTAC systems are also used to cool one room and use evaporation. They are also good for heating during the winter, which is why they are used in many hotels and motels. In dryer climates, the most popular kind of Calgary air conditioning are evaporative coolers. These use a wet pad of some kind where hot, dry air passes through it and becomes cool and humid. These are used for entire homes and buildings, since they work quite well. However, they do not work well in places where there is high humidity because too much humidity can make any area uncomfortable and feel warmer than it is. This system relies on dry heat, which is why they are occasionally referred to as swamp or desert coolers. Many people have a need for a Calgary air conditioning system that is able to be easily taken from one place to another, such as work and home. While fans may be enough occasionally, some hot days require a stronger system. Thankfully, there are portable air conditioning units. These are actually dehumidifiers that work more like the conditioning in automobiles, and re-humidifies it. The water that is taken from the air is collected, which causes the air itself to become warm. It then re-humidifies the air, which makes it cooler. This, however, does not make the air as humid as evaporative coolers do. Many homes opt to install an HVAC system, which stands for heating, ventilation, and conditioning. The cooling part uses a refrigeration method. The HVAC uses air ducts to vent either cool or hot air throughout an entire home effectively and at an affordable cost. This actually makes it an optimal choice for larger buildings and homes. Office buildings, large retail stores, and large commercial buildings use this as a way to keep their clients, customers, and employees cool or warm without having to install two entirely different systems nor spending too much to do it. Calgary air conditioning can be done in many ways, and some systems may be more effective or affordable than others in certain areas or situations, while in other areas they may not be the best option. However, one of the easiest way to decide which one may be best is to know what each one does. This enables people to know what their options are and helps them make a reasonable decision on what they should buy or use. If they are still confused about what to use, a professional will be able to assist them more.
Related Articles -
air, conditioning,
|