Each time when you dock in port you will repeat similar kind of difficult task such as to lift, to pull, to coil as well as to store. However it sounds to be simple and easy, but till the time you have actually lifted up the heavy shore of power cable you will not understand it any better! It is why the key boat builders all across the world have enclosed the Cablemaster specifically for their customers. There is just no simpler method to retract, to extend and to store the shore power cable of your boat. Cablemaster is the wonderful Marine Electrical Products or the power cord reel which is electrically operated and which extends, retracts, as well as stores the shore power cable of your boat effortlessly in the selected area beneath the deck. Cablemaster can easily handle various kinds of the shore power cable ranging from 0.5” or 12mm till 1.625” or 42mm diameter. Moreover, it is even capable to work along with each and every size and diameter of shore power cable which is between 16 & 206 amp service. The minimum requirement of space will even vary and which depends on the model of Cablemaster you select. Specifically, cable which are more than fifty feet long in length or about 15.25 meters, it will need additional space for storage. In case you do not have the adequate requirement of space, an assortment of the installation accessories are obtainable that can help to configure Cablemaster for its installation on the boat. It is even recommended to consult with the sales engineers as well. Moreover Glendinning cable master repair is also done by them in a more appropriate and standardize manner. BENEFITS and FEATURES Powered Retraction and Extension with a simple flip of a switch, Cablmaster will help to retract, extend as well as to store the shore power cable of the boat which will keep it out from the water as well as the decks will be completely free from excessive cable coils. Unlimited length of the cable and so now there is no need for the extension cords. Generally the Cable with lengths of about 80 feet - 100 feet are used. Exclusive design which removes the slip rings and the brushes. Unlike the industry reels, Cablemaster don't carry the shore power through the slip rings and brushes that may be sensitized to moisture and corrosion in the unpleasant marine atmosphere. By removing or reducing the need of detachable plug connection that is used on the boats which are not equipped with Cablemaste the shore power cable may be wired hard to the electrical system of boat which prevents the voltage drops and hot spots.
Related Articles -
Marine, Electronics, Installation,
|