DC Motors With high trade expertise, we tend to are in an exceedingly position to supply a whole vary of world category DC Motors that's utilized in numerous household and business appliances. We provide laminated Yoke DC Motors in IEC frame up to 710, for numerous applications for constant and variable speed necessities. Theses DC motors consumes terribly less quantity of power and needs very less maintenance. These are often simply transported from one place to a different. We provide different types of DC Motors such as speed control of dc motors, separately excited dc motors, permanent magnet brushless dc motors, 24v dc motors, brushless dc motors, ac and dc motors, permanent magnet dc motors, pmdc motors, 12v dc motors, brushed dc motors, electric dc motors, geared dc motors, 6v dc motors, high torque dc motors, 5v dc motors, synchronous motors, 3v dc motors, small dc motors, low rpm dc motors, 48 volt dc motors, dc motor brushless, brushless dc motors, 36v dc motors, variable speed dc motors. Indo Swiss was the primary company to create laminated yoke DC Motors well-liked in India. Indo Swiss offers DC Motors of Open kind, wholly basined, Heat exchanger (Air & Water); Foot or flange mounted machines; category F/H Insulation; Single/ Double shaft extensions, with accessories such as TG mounting, Filters, Protections for windings and Bearing, area heaters, etc. Only some firms within the world boast IEC's vary of DC Motors in frame sizes 80-900 with output torques starting from 1.2 N-m to 162000 N-m and with output powers starting from 0.37 kW to 2600 kW. Small (0.37 kW to sixty KW) DC Motor Features • Laminated yoke construction. • Conformity to BS 5000 and IS 4722. • Category F insulation with the temperature rise restricted to 85°C. • Essential speeds 30% high than the rated speeds. • Mountings - B3, B5, B35, V1. • Cooling - IC01, IC06, IC0041, IC17, IC37. • Enclosures - IP23, IP55, IP54, IP44. Medium (70 kW to 480 KW) DC Motor Features • Laminated yoke construction. • Conformity to BS 5000, IS 4722 and NEMA specifications. • Class F insulation with the temperature rise restricted to 85°C. • Machines have a high di/dt capability. • Special armatures are out there for top speed applications. • On request, tropical treatments are often provided for the windings. • Vacuum pressure impregnation is employed for top reliableness. • Dynamically balanced rotors to attenuate vibrations. • Generously sized shafts that will stand up to eight times the complete load torsion. • Mountings - B3, B5, B35, V1. • Cooling - IC01, IC06, IC0041, IC0666, IC17, IC37, ICW37A86 • Enclosures - IP23, IP23R/44S, IP44, IP54, IP55. Large (350 kW to 2600 KW) DC Motor Features: • Conformity to BS5000, IS4722 and NEMA specifications. • Mounting - B3 • Cooling - IC06, IC41, IC0666, IC17, IC37, ICW37A86 • Enclosure - IP23, IP23R/44S, IP44, IP54, IP55. • Stators are designed from laminations to confirm that the machines exhibit sensible dynamic response and are appropriate for converter supply. • Rotors are dynamically balanced to attenuate vibrations. • All windings are vacuum pressure inseminated. • On request tropical treatment are often provided. • Commutators are mica V-Ring construction. • Shafts will stand up to eight times the complete load torsion. • Terminal boxes are munificently sized and might be placed on the right hand or left hand facet. • Roller bearings are provided within the non-commutator end and ball bearings are provided on the electrical switch end. • Heat exchanger machines have structure filters to confirm mud free operation. • Blowers are protected by air-flow switches to confirm that the machines don't run with out cooling. • Thermisters are provided for temperature protection of mainpole and interpole windings. • Special mechanical necessities of mounting, shaft extension (tandem sets, tapered shafts etc.) and cooling ex-directory during this brochure are often provided for the request. Applications: Printing machines, Plastic extruders, Steel Rolling Mills, Wire Rod Mills, Apron Feeder, etc. Industries: Sugar, Mechanical, Textile, Rubber, Cement, small scale Industries etc. For more information please visit our website: - http://www.electricmotorssuppliers.com/DC-Motors.html
Related Articles -
dc motor, dc motors, , speed control of dc motor, separately excited dc motor, dc motor, permanent magnet brushless dc motor, 24v dc motor, brushless,
|