Are you interested in some saw blade using and maintenance tips? In fact, if you want to use saw blade for a long time or if you want to get top quality cutting results, you’d better know these basic knowledge introduced in article below. Firstly, when storing circular saw blade, please not to pile up too many saw blades together, the right way should be place saw blade into its original package box, which is convenient to remove if necessary. Meanwhile, because of too much sharp and sensitive cutting edge of cemented carbide saw blade tool bit, no matter moving saw blade, installing it or dismantling it, you should be more careful about the tool bit, otherwise once it is damaged incautiously, not only its working life would be shortened, but also cutting quality can not be guaranteed. Secondly, it is necessary to clean and maintain saw blade with right ways at fixed periods, for example, you have to ensure that the saw machine principal axis is not out of shape, and there is no abnormal vibration, or the boss rod is vertical and smooth. As for the tolerance of diameter of axle, it would be more or less 7mm. In addition, after a few time using for cutting, saw teeth should also be cleaned, for example, you have to clean the resin or cutting wooden crumbs on both sides of saw teeth, otherwise there would be huge cutting resistance if there are lots of adhesive pieces accumulated at here, as a result, cutting quality would be more coarse because of high consumption of energy. What’s worse, sometimes machines motor would be damaged because of high cutting temperature. By the way, ring flange should be smooth, flat and clean, too, and its size would be about one of three of saw blade diameter. Thirdly, how to install saw blade with right ways? As usual, when installing saw blade, it should be a litter higher, about five to six saw teeth height, than the cutting panel. At the same time, pay attention on the saw blade direction of rotation, which should be the same at machine principal axis direction and you can find the mark on saw blade body. Once the direction is not installed rightly, during cutting process, it is likely to be dropped and even flied, which is so dangerous and should not be avoided with right ways. Once there is no large gap between saw blade inner diameter and diameter of axle, install ring flange and fix nut. When looking for Circular Saw Blades, please not to miss Flostools, which offer top quality circular saw blades products including Wood Saw Blades and Saw Blades for Aluminum. Visit us for more information.
Related Articles -
Saw Blade Tips, Circular Saw Blade, Saw Blade Using,
|