In this article we will discuss some of the frequently asked questions about stainless steel products like fasteners, screws, bolts, tubes, pipes, round bars, plates and sheets and many more. Q: What exactly stainless steels are? A: Stainless steel is a generic name for a corrosion family alloy that contains 10.5% or more chromium that makes the steel stainless and also improves the corrosion resistance by forming a chromium oxide layer or film on the steel. When this fine thin layer placed in the right condition can also be self repairing. Q: what are the applications of stainless steel? A: Stainless Steel are used in full range of applications such as domestic (sink, cutlery, microwave oven liners etc), Oil and Gas, Food & Drink (catering equipment and food processing system), Medical (surgical equipment and implants etc), Water (sewage treatment and hot water tanks etc), Transport (road tankers, exhaust system) and so on. Q: Does stainless steel corrode? A: Stainless steels are much more resistant to corrosion than the ordinary alloy steel or carbon. However in some circumstances it can corrode. You can call it stainless not stain impossible because in some more aggressive conditions, the basic types of stainless steel corrodes. Q: what are the types of stainless steel available in the market? A: Usually it is classified into 5 types that include: • Austenitic: These steels are derived from the combination of Nickel, Manganese and Nitrogen that gives these steel the characteristics of formability and weldability. Austenitic steel in its standard form are vulnerable to stress corrosion cracking. • Ferritic: Based on Chromium with carbon less than 0.10%, these steels are used in wide range of applications where welding is not required. • Duplex: Formed with the combination of 50% ferritic and 50% austenitic approximately. Gives higher strength than other alloy steels and are resistant to stress corrosion cracking. • Martensitic: Similar to ferritic based on Chromium and have higher carbon levels up high as 1%. Usually used where high strength and moderate corrosion resistance are required. • Precipitation hardening: High strength can be developed in these steels by adding Copper, Aluminum and Niobium. Q: Can we use stainless steel at low temperature? A: Austenitic stainless steels are usually used at low temperature and another factor that can affect the choice of steel at low temperature is the resist transformation ability from austenitic to Martensitic. Q: How do I choose which stainless steel to use? A: Here are some tips that will help you in choosing right stainless steel to use for your project: • Check the corrosive environment • Check the temperature of operation as higher temperature usually accelerates the corrosion rate. • How much strength is required? • What product form is required? • Which product form is required? • Check its availability as there may be perfectly correct technical choice but cannot be implemented because of non availability at the time required. Keep remember steel type is not only the factor in material selection. In some cases surface finishing is also considerably important. RMT can provide complete package including welded pipes a modern infrastructure to handle complex project packages in terms of Stainless Steel Fasteners Exporters handling. We are leading industrial fluid flow control valve, honeywell pneumatic valves, high pressure check valve and Durable Fasteners.
Related Articles -
industrial fasteners supplier, stainless steel bolt manufacturer, stainless steel bolt manufacturers, stainless steel fittings dubai, stainless steel fitt,
|