The applications for Canada Blower duct fans include heat, smoke, and fume removal; process ventilation and process air handling; process drying with ambient or preheated up to 650 F air; comfort process cooling and general ventilation of buildngs. Available in direct drive arrangements 4/4M/4V/4D/4R and corresponding belt drive arrangements 9/9M/9V/9D/9R. Capacities: to 350,000 CFM. Static pressure to 1.5 inches water gauge. |
Inlet flanges, outlet flanges, companion flanges for Buffalo Blower (New York) duct fans are continuosly welded to match ANSI class 125/150, DIN, ISO, or custom hole pattern.
Canada Blower shaft seals are made with shafting is straightened to close tolerance to minimize "run-out" and ensure smooth operation. Bearings are of pillow plock, or flaged bearings. Ceramic shaft seal and lubricated shaft seals (Buna, Teflon, Viton) are standard. Red silicone gasketing is used on high temperature applications.
Heat fan construction on Canada Blower inline duct fans goes up to 650 F and includes high temperature paint, shaft cooler, shaft and bearing tunel cooling auxiliary blower (optional), insulated shaft and bearing tunel, steel, or alloy wheel.
Aluminum wheel, Steel wheel, or Alloy wheel: duct fan for non-sparking x-proof applications is supplied in AMCA A, AMCA B, or AMCA C spark resistant construction in all aluminum welded construction, or in monel. For corrosive environment duct fan is supplied in 304 SS, 316 SS, or 316 L stainless steel construction. For chemical process applications duct fan is available in fiber reinforced plastic frp construction, or in polypropylene construction, or in plastic. For high temperature applications up to 650 F duct fan is supplied typically in steel welded construction. Cladding for sound attenuation and silencers consists of 2 inches mineral-wool insulation covered with a welded steel jacket. Canada Blower - New York Acoustic cloth jackets are available as inexpensive alternative. Inlet silencers / outlet silencers are supplied with matching flanges.
On many Canada Blower ventilators external inlet vane damper is provided for precise air volume control. Standard accessories for Canada Blower inline axial duct fans and blowers could be: flash / raised access door, inspection port, drain and plug, 3-way drain, mount feet, belt guard, motor cover, spring vibration isolation, rubber-in-share (RIS) vibration isolation, vibrating pads, electrical actuators, pneumatic actuators. Roof mount accessories are: roof curb mount cap, roof curb, weather band, weather shroud with integral flap damper, butterfly damper assembly, magnetic latches.
Complete control packages available on Buffalo Blower fans are: variable frequency drives (VFD), across-the-line starters, RTDs, pressure sensors, flow meters - complete control packages.
For additional information please refer to http://canadablower.com
Susan Terlitski HVAC Ventilation Engineer Canada Blower Co. firstname.lastname@example.org http://www.canadablower.com/air/index.html http://www.canadablower.com/enclosures/index.html
Related Articles -
duct fan, axial fan, inline fan, blower, New York, ventilator, mixflow, mixed flow, tubeaxial, vaneaxial, centrifugal, tubular,