|
Canadian Blower's SQB backward inclined wheel and square housing design, the SQB is efficient, economical and versatile. It is also quickly available through Buffalo Fan's Stock Fan program. Packaged fans, those furnished with motor, V-belt drive, belt guard and other options, are factory aligned, run tested and shipped ready to install. By eliminating jobsite assembly, the packaged SQB fan can substantially reduce overall installation cost. Canadian Blower SQB Type "B" wheel has backward inclined blades designed to handle corrosive or dusty airstreams. Typical applications include: oven circulating, dust collector exhaust fans, fume exhausters and emissions control systems. Since the blades are solid steel, the "B" wheel is ideal for custom applied corrosion resistent coatings. The SQB is also suited for high temperature gasses and air to 650°. For greater safety in explosive environments, spark resistant construction is offered. The versatile SQB is furnished in 14 sizes in Arrangements 1, 9 or 9H and in three classes of construction. To cover the widest range of system requirements, Buffalo Fan offers a family of airfoil and backwardly curved fan designs with overlapping performance envelopes. To maintain high efficiency and maximum economy, the system's pressure and flow requirements are matched to one of eleven wheel designs with varying rotor widths and diameters. The selected fan is then sized to exact duty requirements. Wheels are available with either Canadian Blower's proven hollow airfoil blades for clean air, or solid backward curved or backward inclined blades for dusty, dirt applications. With eleven rotor designs, custom sizing and duty matching blades, Canadian Blower builds the fan to meet exact system performance specifications. Severe duty industrial backward curved blowers are supplied in welded heavy gauge steel construction to prevent flexing at high pressure. Available in direct drive arrangements 4/4V/4H/7/8 and belt drive arrangements 1/3/9. BC fans are available in single width single inlet (SWSI), or double width double inlet (DWDI). Capacities: to 500,000 CFM. Static pressure up to 70 inches water gauge depending on the class of construction. Typical class of construction is Class 1, 2, 3, 4 and 5. The two most important criteria when specifying a custom heavy-duty fan are efficiency and reliability. Air handling systems are increasing in complexity with the addition of more restrictive emission controls and air cleaning devices. While the results have been a cleaner environment, system pressure requirements have risen significantly. As these requirements increase, greater levels of energy are needed to force the air or gas through the system. Operating efficiency of the fan has become much more critical. Every dollar saved on the purchase of a less efficient fan will be consumed in additional operating costs. Maximum fan efficiency will not only have a positive impact on the bottom line, it will have a positive impact on the environment. Greater fan efficiency results in lower power requirements and fewer natural resources consumed. Efficiency also influences sound levels. The more efficient fan will run quieter than the less efficient fan. The quieter fan will need less sound insulating materials, or none at all. For additional information please refer to http://www.canadianblower.com/index.html Oleg Tchetchel Industrial Process Engineer oleg.tchetchel@canadablower.com Canadian Blower Co. http://www.canadianblower.com/news/index.html http://www.canadianblower.com/price/index.html
Related Articles -
backward inclined, backwardly inclined, blower, fan, ventilator, centrifugal, industrial, airfoil, forward curved, radial, scroll cage,
|
