Some people find iron fences more attractive than their traditional concrete and wooden counterparts when it comes to residential structures, not to mention more durable and can be bent and customized to fit your aesthetic desires in a much easier and efficient manner. These wrought-iron Oklahoma fencing are also strong and resilient against natural elements while maintaining a classic look. This quality is sometimes overrated though, and most people assume that the strength inherent in this type of material means that it won’t get damaged, ever, regardless of the amount of time. Of course, obviously, while the metal isn’t susceptible to total destruction, it is prone to rusting. Rusty fences give a bad impression, and people, nine out of ten, will think that you’re a sloppy person who isn’t capable of maintaining a good home. That is actually the least of your concerns, because rust will actually weaken the integrity of the material’s core, and repairs might sometimes be too late, which results to more expenses. So to address that, these two tips are actually important if you want to maintain the beauty and the strength of your iron fences. Rust Removal This is by far an easy job to do, where you can use a wire brush to remove those rusty spots to prevent it from tarnishing your beloved fence. Basically, the brush works by flaking off the bits of rust from the iron, but if the rusting is already quite deep, you can use a coarse medium sandpaper to remove as much rust as possible. Now, for those persistently tenacious rust that remains, you need to wear your rubber gloves and get serious. Other things you need are steel wool, some paraffin and a damp cloth for finishing touches. Now, once you have the said materials, sand the rust some more until the metal is a bit closer to its originally rust-free form. After that, a drop of paraffin should be applied to the steel wool to remove the most insidious remaining rust spots until they’re annihilated from the face of the fence. All done, wipe the areas you just sanded with the damp cloth and admire your beautiful work. Protective Coating Since you’re able to remove rust from your iron fence, you need to put in a few more effort for it to have an extra layer of protection, and a common liquid car wash will actually be sufficient to do the trick. Using a smooth cloth, apply the liquid car wash on the iron fence’s surface until its entirety is covered. After that’s done, just leave it for a day for it to dry completely. Polish it with the same smooth cloth the next day for final touches using circular motions. Once you complete all these steps, your iron fences will not only have a squeaky, glistening clean surface but also a stronger structural integrity. This maintenance technique should be applied as soon as the first signs of rusting shows, to reduce the amount of work to be done and prolong the life of your iron fences to unprecedented durations.
Related Articles -
Oklahoma fencing, fencing Oklahoma, custom gates and fences Oklahoma, garage door repair Oklahoma City,
|