Sometime during your existence you’ll have to use the services of Houston carpet repair. If you do not want to make use of the services of a professional company you are required to have the right knowledge in terms of carpet repair. If you want to have the job done! There are 2 kinds of repairs that can be done. First of all you have to re-stretch the carpet and then you have to cut & plug. Re-stretch This action is used in the moment in which you want to make the carpet look brand new. This will help you remove wrinkles and will make it last longer than ever. However, remember that before starting this action you’ll have to use a knee- kicker. The next step is to unfasten your carpet from the tack strip. With the help of the kicker you’ll have to kick the carpet online in 1 direction. After you do this, reassure yourself that the strip holds down the carpet and then kick in different directions. Check if the strip holds the carpet the way it should be and check if there is any extra material which has to be eliminated. Vacuum the carpet normally and don’t worry about the waving form of the carpet. This way, you are done with the re-stretch. Cut & plug When it comes to cutting and plugging, you must know that this refers to a type of repair which requires a bit more attention. This is great for repairing burns, stains or different damages. This involves cutting a patch that is similar to the carpet and replacing the damaged area with this patch. Before getting started you need carpet tape, knife, fine needle, scissors, glue gun and sticks. When you have managed to gather them around, use the needle or the crochet in order to separate the pile that exists around the ruined area (you must manage to create a rectangular or a square shape around the area that is damaged). Follow the rows that are separated in the carpet and this way you will manage to get a very fine cut. Matching This is probably one of the hardest parts of the entire experience of Houston carpet repair. Marching the patch to the carpet requires extra attention. When you have the patch, model it so that it matched that area you want to cover. Try marking the direction of the carpet on the piece you want removed. This way you will know the direction in which the pile must go. Continue by placing the tape on the surface on which the carpet is (in the case of the glue down carpets simple adhere straight to the wood floor or the concrete). Afterwards use the gun in order to glue the piece, placing it right on the area you have prepared. When you have found the correct position, apply pressure so that the hot glue can stick to the surfaces. Almost done At this point you are almost finished. The next thing you must do is place a few objects with a certain weight in order to maintain the carpet in a flat position. This way your carpet will resemble the original. After a few days, this carpet will begin to blend into the mix due to the traffic existent! Be carefully! It might sound pretty simple, but when you want to do this, you might not see it as simple. But if this occurs, you will not have to worry. Just call a Houston carpet repair professional and he will know what to do!
Related Articles -
Houston carpet repair, types of carpet repairs, carpet repair professionals,
|