Vehicle and custom truck wraps are printed graphics that are applied on a vehicle's body, on a temporary basis. If you are worried about the vehicle, then you should stop doing so because the wraps in no way cause any harm to the vehicles, however, only if properly applied. You can make any type of graphic design, and that can be printed and applied to a vehicle, including a decorative and advertising work. |
Wraps are generally available in distinct coverage areas, allowing you the freedom to either fully or partially wrap a vehicle. This is one of the most popular ways in which advertisers market their products and services.
If you want to create custom vehicle wraps, following are some tips for you:
Know the vehicle and the vehicle graphic It is necessary for you to refer to the photographs of the vehicle that you'll be working with, in order to start with your design. It is better if you overlay the snapshot and the template that you are using in corel draw or Photoshop, in order to make sure that you are using the right one. Carefully check the lines, contours and recesses that you will need to work with. You need to check what trim appears on the actual vehicle of your client and whether it is in the same location as on your template; this is an element of the wire frame of your template vehicle that is most likely to be miss-sized or miss-placed. So, check these things first and make all the adjustments before you start with the design.
Know the design application that you should use All vehicle or custom truck wraps should be created in either Illustrator or in Photoshop, for predominantly vector-based designs and predominantly photographic images respectively. Apps like Quark should not be used because it does not allow you to view your design in full size.
Size is very important Before you make use of an image, see if it can stand being increased to the size required on the final wrap. Do not forget that everything appears magnifed when placed in a large format. So, if its looking rough on your screen, it'll look worse in the its printed version. The thumb rule says that one should use the largest file size and resolution that you can with your elements.
Colour is of great significance Before you submit the final copy of your design, make sure you review your design's sample print on a piece of the real material that your wrap will produced on. It is also important for the sample to be produced using the real machine that will be printing the finished design. As far as the colours are concerned you need to order Pantone colour codes. If are not being able to specify Pantones then you should be giving the vehicle wrap provider a printed hard-copy showing the colours that they need to try and match. You should not supply with CMYK breakdowns, as the colours vary from one machine to another. Make use of Pantones or have a small printed sample for ensuring the livery coloration that you have designed.
If you keep the above points in mind you can surely design great looking custom truck wraps for your clients, keeping them happy with your work forever.
Related Articles -
custom, truck, wraps,