|
FUSION BONDED EPOXY COATING Fusion bonded epoxy coating, commonly referred as FBE coating is widely used to protect concrete reinforcing rebars, steel pipes, piping connections, etc used in construction. FBE coatings are in the form of dry powder at normal atmospheric temperature. The powder when applied electrostatically on to the surface cleaned, hot steel bars, that it fuses, melts, flows and cures to an adherent continuous chemically cross linked protective film. FBEC is used to protect reinforcing steel in concrete in the most adverse environments that are prone to corrosion over the last 35 yrs in all over the world and for the last 18 yrs in India. Benefits of Fusion Bonded Epoxy Rebar Coating A fusion bonded epoxy powder coating can offer a number of important advantages over traditional liquid paint. The superior corrosion protection can extend the life of the treated part, resulting in significantly lower lifecycle costs over time. Little maintenance is required, which also can lead to substantial savings in labor costs. Finally, epoxy powder coated rebar is a sustainable solution that is friendly to the environment, a primary concern for industrial companies everywhere these days. Epoxy coated rebar is used instead of conventional reinforcing bars to strengthen the concrete and protect against corrosion. The epoxy coating is applied in a factory to the steel prior to shipping. Epoxy-Coated Steel Reinforcing Bars (rebar) may be used in any concrete subjected to corrosive conditions. These may include exposure to deicing salts or marine waters. Evaluations of hundreds of structures in many different environments have shownthat epoxy-coated rebar is performing to reduce the corrosion that damages concrete structures. Fusion-bonded epoxy coatings have a very successful track record for protecting pipelines and reinforcing steel against corrosion all over the world. These coatings have proven themselves from the highly aggressive environment of the Middle East region to the arctic. New coatings are now available as new technologies and new standards developed in the unending quest for improved lifetime benefits of corrosion control. The advantage of pipe and rebar is that their round shape allows continuous linear application over the exterior surface, while the parts are moved in a conveyor through the powder application booth, ensuring high throughput. On fittings, etc., the coating is applied by Automatic spray guns. PROCESS DESCRIPTION The process of applying fusion-bonded epoxy coating to steel reinforcement involves four major steps: 1. Surface preparation. 2. Heating. 3 Powder application. 4 Cooling. BLASTING OF BARS: Reinforcing steel is blast-cleaned to a near white metal finish using abrasive material (shots & grits) in Shot Blaster. The shots clean the surface of the bar & grits provide an anchor (40 – 100µm) to the bar surface. HEATING OF BARS: The blasted bars are heated to required temperature specified by the Epoxy powder manufacturer (around 230°C) by passing them through an electric induction heater. COATING OF BARS: The heated bars are then passed through an Epoxy coating booth where epoxy powder is applied electrostatically. As the powder leaves the gun, an electrical charge is imparted to the epoxy powder particles. These electrically charged particles are attracted to the grounded steel surface providing a uniform coverage of the coating. When the dry powder touches the hot steel, it melts, flows, quickly gels as a film (200 –300 µm thick) on the reinforcing bars and on its deformations while the residual heat cures the coating. COOLING OF BARS: The coated bars after curing are passed through a cooling tunnel, where water is sprayed on to the bars to cool them. The bars are then kicked off on to the final inspection rack for testing and inspection. The testing on coated bars is carried as per ASTM775 and IS 13620 or such specification requirements. The acceptance tests usually conducted are thickness measurements, flexibility test and holiday test. Once they are inspected they are bundled/strapped for dispatch to the job site for fabrication and will be part of the structure Fusion-bonded epoxy coating principally protects against corrosion by serving as an electrochemical and a physical barrier that isolates the steel from the oxygen, moisture, & chloride ions that cause corrosion. Epoxy coating has high electrical resistance, which blocks the flow of electrons that make up the electrochemical process of corrosion. In addition to serving as a circuit breaker, the coating protects in way that is less obvious: coating reduces the size and number of potential cathodic sites, which limits the rate of corrosion reaction that could occur. As a matter of fact, for macrocell corrosion to take place, a large area of steel surface is needed to serve as the cathode where oxygen reduction can occur. The coating almost eliminates such cathodic reaction. To know more about Mitsuba products please visit: www.powdergun.com or contact us at: Mitsuba Systems (I) Pvt Ltd 34/H, Laxmi Indl Estate, New Link Road, Andheri (W), Mumbai – 400 053 Tel: 6692 4151/52/53 Email: sales@powdergun.com / mitsuba@powdergun.com Web: www.powdergun.com
Related Articles -
FUSION, BONDED, EPOXY, COATING,
|
