There is nothing worse than a house fire. Not only are your house and belongings damaged but also there is often a risk to you and your family. Even after the fire has been dealt with, there is the aftermath of the fire to deal with. Common problems which include smoke damage cleanup, cleaning up the water and the chemicals that were used by firefighters. The damage to your house shows on your burnt and blackened walls and ceiling. Soot Soot is the residue left by burnt things after a fire. It contains a lot of carbon-based impurities and is mainly caused when the material doesn’t burn completely. The texture of soot is oil based because there are plastic things in every home and burning them leads to oily molecules getting released in the air. Soot can wreak havoc when it enters a person’s respiratory system and thus, it is a serious health hazard. When soot particles enter the alveoli, they get released into the blood stream and through that, the impurities reach various parts of the body. If the impurities get accumulated, the person’s health could suffer. However, the worst possible effect of soot is its tendency to cause cancer and cause serious defects in the birth of a newborn. Soot produces polycyclic aromatic hydrocarbons in its gaseous state. These hydrocarbons are responsible for gene mutation for particular groups of genes, and they can cause birth defects in the child and also increase the chances of getting cancer. After the fire, many things would be destroyed and replacement would be necessary. However, you can only find out about what to replace after you have cleaned everything up. It might seem like a tiresome task but it should be dealt as quickly as possible as procrastinating it would make matter worse. To deal with the damage caused, preform some smoke damage cleanup. The Cleaning Process Never start your cleaning process before you are properly attired. Your heavy-duty gloves, safety goggles and mask should be worn over your face and should cover as much as they can. Carefully cover your nose and make sure the safety glasses have no place for dust or soot to get into your eyes. After you put on your heavy-duty gloves, use the sponge and soak it into the TSP solution. The TSP solution contains a gallon of water and a tablespoonful of TSP. Work section-by-section, focusing on one segment and wall at a time.First, wipe the surface of the wall or ceiling with the sponge and use hard and firm strokes. After that, dip the rags in clean warm water and rinse the ceiling and walls. Do the same with the other segments until everything has been cleaned properly. The frequency of the above step may be more than one. It depends on the condition of the house after the fire and how much charring and soot buildup has occurred. You must be careful not to over-wash your ceilings and walls because seepage of water might occur into the drywall or baseboard. Don’t saturate your walls with TSP and warm water. Conclusion After you are done with the smoke damage cleanup, you need to make decisions and come up with a budget about what to replace and what to repair. For things that need repairing, depending on what it is, contractors are there to help you with fire restoration. Have the top quality emergency flood cleanup Arlington Heights IL services with ZippyRestore providers as they provide the hot selling services for their customers at much prices.
Related Articles -
emergency flood cleanup arlington heights il, zippyrestore,
|