|
In the world today, there are many systems that have to work together in order for us to lead comfortable lives. As we live in estates we need water that is well piped in order to enjoy the services provided by whoever is responsible for doing that. As if not enough, the drainage system need to be fine, especially those of industries since they contain chemicals from the reactions of the raw materials. For us to travel safely and efficiently without any difficult during our journeys, we need vehicles whose engine piping has been done correctly. Moreover, Pipeline transportation also needs to be installed in the right way that is recommended to facilitate smooth flow of various liquids that can be transported using pipeline and examples include petroleum products most of which have chemicals. The above mentioned scenario among many others, are made possible through the use of valves. Valves are very important as far as the flow of liquid products is concerned. Among the many different types of valves that exist in the world of piping, chemical industrial valveis one that is very special and important in industrial piping setups. There are different types of chemical valves that are used for different purposes depending on the type of liquid the system is meant for and the chemical that it contains. Why industry specific? Most chemical have different effects on different materials. Therefore when a certain chemical is channeled through given pipe, the materials of the valve used need to be of a type that does not react with the chemical so that it does not corrode the valve leading to unwanted leakages. This calls for industries who use and produce chemical products study and understand the chemical properties of their products and raw materials establishing how they behave when they come in contact with the valve. In essence, we need to have valves that are specific to the type of chemical that is passing through that pipe at that particular time in order to avoid more losses that may come as a result of a valve being corroded leading to a mix-up of chemicals or unwanted flow of chemicals. More categories of valves It is also important to note that we can also categorize valves in terms of how they allow flow of fluids through them. Among them is the three way globe valvethat allows flow in three directions. This means that such a valve is normally put at a junction where there pipes meet from three different directions. Apart from being three pipes, they also allow flow of liquids from any direction. This means they are flexible. This is an advantage to many industries as they can allocate many tasks on a single channel. For instance, we can transport petrol at one time using a given channel and then transport kerosene in the opposite direction later. Other types of valves that fall in this category include one wayglobe valve that allows one direction flowand two way that allows both directions. BIO: The Chemical Industrial Valve is veryimportant when it is considered since it does not allow the risk of corroding the valves by highly reactive chemicals. More so, to better the performance of any given system, one needs to have a three way globe valve so that there is flexibility in the flow of fluids.
Related Articles -
Chemical Industrial Valve, three way globe valve,
| 
