Cooling towers are heat rejection devices. They are integral to many refrigeration systems in both commercial and smaller residential applications. In many instances, systems are required to operate 24 hours a day, so continued up-time is critical. When a problem does occur, however, trained professionals who work on cooling tower pumps in Los Angeles can be contacted by phone or at http://coxindutrialservices.com before the issue mushrooms into emergency status. Removing Hot Air Using the example of your home HVAC system, heat is removed from the air with the help of a cooling tower. This system component is placed outside your house, either on the roof or next to the building. The system is actually very simple and efficient. Heat is removed from water circulating inside the tower by allowing a small portion to evaporate into the atmosphere, and the remaining water stream is cooled significantly. The same sort of procedure is also accomplished with heat pump condensers—a design, by the way, that is based on the condensers that were built for steam engines in the 19th century. Industrial Cooling Towers Power plant cooling towers are often mistaken for industrial chimneys because their appearance is similar. In an industrial operation, cooling water is pumped from the tower basin and routed through the coolers and condensers, absorbing the heat from hot process streams. The heat that is absorbed warms the circulating water, which is returned to the top of the tower. It then trickles down over fill material, meeting air that is rising upward, either by natural draft or with the help of large fans. The contact results in the evaporation of a small amount of water along with its heat. The remaining water is cooled and ready to recirculate. Common Applications Small cooling towers, like those for residential use, handle water streams on a few gallons of water per minute, while the largest commercial or industrial towers cool hundreds of thousands of gallons per minute. In addition to power plants, these can be found in steel mills, oil refineries, chemical processing facilities and in many kinds of manufacturing processes. Cooling tower pumps in Los Angeles are components that help provide comfortable environments for airports, hospitals, hotels and office buildings. Environmentally Friendly Because of their shape and large profile, many people think power plant cooling towers are industrial chimneys that belch pollution into the atmosphere. However, that which appears in the air above the tower is only condensed steam composed of the same sort of water droplets that form clouds. Cooling towers are no more harmful to the environment than other heat-rejection devices. Relying on the Pros Professionals who install and repair cooling tower pumps in Los Angeles have been in the business for 30 years. They will come to the customer’s location to take care of the required services and are qualified to perform their own shutdowns so that facility operations are not interrupted. Any cooling tower problem is always a concern, but round-the-clock pump repair service is available as needed. Facilities where continuous up-time is critical may wish to consider a cost-effective, 24-hour service plan as an investment in a sound operational strategy. Quality workmanship that comes with a one-year warranty is provided for all pump repair services.
Related Articles -
cooling, tower, pumps, in, Los, Angeles,
|