|
It is essential to adjust the slack adjusters properly on a heavy vehicle or truck. When they are not adjusted well, air brakes may malfunction. Thus, it is a safety risk. How do you adjust it? Well, it is not a complex task. You need just an adjustable lever which is attached to a pushrod and air cylinder assembly on one end. On the other end, there is a brake assembly. When it is adjusted well, the brake components give optimal performance and proper tolerance. It doesn’t take much time to make this adjustment. If at all users need some help, gear manufacturing companies in India can extend the same. How to adjust it? You need to start the vehicle and make the air pressure to the maximum. After that, you should shut off the engine. Care should be taken to place the vehicle in such a manner that it doesn’t move while you adjust the same. The brakes should be checked and adjusted by pushing the air valve. It is important to use the right size of the wrench according to the size adjustment bolt of the air brake. Now the point where the pushrod enters the air cylinder should be marked by checking the free play. Use a screwdriver or pliers to move the slack adjuster back. After measuring the distance between the cylinder and the chalk mark, you need to adjust it. Remember, if the distance is less than ¾ of an inch, then there is no need for adjustment. All the brake assemblies should be checked one by one. Ask expert gear manufacturing companies in India if you need any help. How to adjust air brakes? The first thing you should do is to locate the adjustment bolt. If there is a sleeve around it, then you have to push it inward. You will require a box and wrench to push the sleeve. By turning the bolt, you can bring it to the desired place. You have to check the pushrod to ensure the right direction of the turn. You have to turn it until you feel resistance. It means the brake lining is in contact with the drum. You can turn it half or one-fourth in the opposite direction if required. It will create space between the drum and the pad. Start the vehicle and check it. The slack adjuster is working fine now. Gear manufacturing companies in India offer online help if you need it. To get different types of gears for your industry, contact the most renowned Gear manufacturing companies in India.
Related Articles -
gear manufacturers, sprocket manufacturers,
| 
