If you are heading a manufacturing unit where heavy machinery is operated then you must be aware about Penetrant inspection. Penetrant inspection and magnetic particle inspection is usually used during the manufacturing process of heavy machinery and as a means of maintenance for equipment which saves heavy capital loss caused by machinery deterioration. Magnetic Particle inspection is performed on ferromagnetic materials like steel, iron etc to check the maintenance of the machinery. To perform a magnetic particle inspection are done via dry particles and fluorescent wet inspection. Usually dry particle test is performed by companies however, to check small discrepancies, cracks and seams in the heavy machinery, fluorescent wet inspection comes handy. This method is low cost and is applied to detect defects on the surface in non porous materials industry wide.
Non-destructive testing is mostly used in aerospace machinery and heavy machinery by mechanical engineers, forensic engineers etc in the aerospace and medical sector etc. It is called Non destructive testing because it allows the inspection team to find out defects and discrepancies in the metal without actually altering its physical or chemical state. Different companies use distinguished methods of non destructive testing like remote visual inspection, dye penetrant inspection, radiographic inspection, ultrasound inspection etc. liquid penetrant testing is widely used and has a pan industry approach because it gives quick results and is flexible. Liquid penetrant method of inspection can be used on any type of machinery of any size which is why it remains to be a popular choice among inspection professionals.
Aerospace sector is one sector that puts Non-Destructive evaluation to use frequently. In the aviation industry, Non destructive evaluation is used to inspect power plants, aircrafts, and parts of aircrafts. Means and methods of Non destructive inspection differ and are usually specified by the manufacturers of the aviation equipment. The feasibility and usefulness of the inspection method used on the equipment depends on the inspection professionals carrying out the process. Non destructive evaluation can be carried out on any equipment of any size and this flexibility has lead different methods of non destructive evaluation developed and followed as per the regulations of different industries.
There are numerous professional companies that provide Non- destructive inspection services. expert inspection companies carry out alkaline cleaning, type II cleaning, dichromate cleaning passivation, liquid penetrant inspection via fluorescent water, washable, florescent post emulsified hydrophilic liquid penetrant inspection, abrasive cleaning via aluminum oxide, epoxy enamel topcoat, AC and DC magnetic particle inspection, In process and final inspection, raw material magnetic particle inspection, new manufactured hardware inspection and along with inspection, certain companies also provide pre and post inspection cleaning. You can find a number of expert inspection services on the yellow pages or the internet and it is advised that you always check the method of inspection and that if it is suitable for your machinery.
You can learn more about Magnetic Particle inspection and means of non destructive inspection as specified by different machinery manufacturers.
Related Articles -
Penetrant Inspection, Non-Destructive Inspection, Non-Destructive evaluation, Non-Destructive testing, Magnetic Particle inspection,