|
Grain dryer Practice - Safety Precautions 1 lightning protection system should be set. (2) All moving parts of the device should be set up protective cover, and a warning or indication signs. 3. The system is running, the electrical system should be equipped with the specialist responsible for the management, strict implementation of electrical safety procedures. Shutdown, to cut off the power. 4 has been installed or are in operation in the grain before drying, drying silo grain storage and drying machine is not allowed into the segment. 5. Drying operation is performed normally prohibited to open the door. 6 stove shutdown, the furnace temperature should be lowered to 50 degrees below and to the ventilation state to enter maintenance. Maintenance personnel shouldcement equipment take security measures. 7. Equipment repair, electrical control cabinet should have warning signs, and special care. 8 high-altitude operations and maintenance personnel should be equipped with seat belts and helmets. 9. Altitude welding operation, Light Weight Block Machinethe following may not have grain and flammable materials. Combustibles away from the weld should be done closer to the fire treatment. Site should be equipped with fire fighting tool. 10. Always check the dryer exhaust grain is smooth, found grain discharge board or impeller clogged, should be cleared up, to prevent the flow of poor grain formation inside corners, excessive grain drying fire. 11 shall not be prolonged overload stove, so as not to burn the heat exchanger caused dryer fire. 12. Strictly control air temperature, Aerated Lightweight Brick Machineto prevent staff negligence caused by hot air temperature dryer fire. 13. The dryer on fire, the fire is not extinguished before anyone allowed to enter the dryer. 14 bucket elevator bucket with a stuckgold mine plant failure occurs, you can not pry your hand or a hard object with a bucket.
Related Articles -
Grain, dryer, Practice, -, Safety, Precautions,
| 
