Abrasive blasting: What You Need To Know

If your enterprise is in the Chemical industry, or even Construction or Oil and Gas industries, you need to spend time and effort to keep your equipment and work surfaces clean and smooth to ensure that they work properly. The only way that you can achieve this in a reliable and consistent manner is to do abrasive blasting.

Abrasive blasting is the process whereby a stream of abrasive material is blasted against the rough surface so that it smoothens properly. The abrasive material is sent out under great pressure so that it does a good job in making the surface smooth or clean. There are many different materials that could be used to get the job done and the selection is usually based upon the nature of the surface that has to be made smooth or clean. This is not a simple process at all. As a matter of fact, you need to hire the best possible contractor to get the job done because it is time consuming as well as it needs meticulous planning. The blasting has to be done in such a manner that only the rough areas and impurities are removed. The operator of the machine should be able to do a thorough job without damaging the surface in any way.

Make sure that you select a contractor who can offer you abrasive cleaning services of the highest quality. Your contractor should have invested in the best equipment as well as employee training programs because this ensures that the work done will be of the highest quality. Not only should the work be done well and on time but it should also have the least possible impact on the environment and on the workers' health. One should keep in mind that abrasive blasting is necessary in order to keep industrial surfaces clean of impurities and to ensure that they remain smooth at all times.

Sand blasting, also known as abrasive blasting, is a process where fine granular sand is applied using high pressure against a rough surface in order to smooth that surface out. In this process, the abrasive material is propelled with either liquid or gas (typically pressurized air) through a nozzle onto an uneven surface with the intent of evening it out. Sand blasting can be used on wood, walls, and other surfaces where smoothness is needed for paint or other applications.

This sort of blasting can be done in a number of ways depending upon the desired results. The most common choice is a portable device that is sprayed on a large surface. If this method is used, the operator of the blaster should take precautions such as not working in a confined area or wearing personal protective equipment, commonly known as PPE. Some methods (such as wet blasting, or sand blasting using water) negate the risk of airborne contaminants but pose another risk in the form of wastewater. Also, the use of certain materials such as silica sand is recommended to keep the risks down.

Sand blasting can work wonders in evening out surfaces but poses risks if it is not done properly. In addition to new methods and ways, operators need to be mindful of the safety hazards and risks posed by improper use of their tools. Failure to abide by these safety guidelines could lead to both short term and long term health risks, such as lung problems in the future. But if it done properly, it is a great tool to speed up an otherwise time consuming job.

For more info on dust collector log on to blast abrasive for a more in-depth approach on the above article.

Related Articles - dust collector, blast abrasive, grit blasting,

Email this Article to a Friend! Receive Articles like this one direct to your email box! Subscribe for free today!