Some time ago, most pools did not have a filtration system to keep water clean and bacteria free. They worked simply by filling the pool with clean water. On certain days, when the water seemed unpleasant, they were emptied, cleaned, and refilled. Undoubtedly, this represented several disadvantages: the cost of water, an unsanitary swimming pool, and an unpleasant bath due to insufficient transparency of the water. But at present times, all pools have a filtration system to maintain the water clean, free of algae and bacteria. The two most central components of the treatment plant are the filter and the pump. |
The sand filter
All we know that the filter is the main part of assurance clean and pure water. The swimming pool sand filter has not only the ability to eradicate leaves or insects; but also dirty and microparticles that pollute the water.
With this type of filter, you always get crystal clear water that is perfect for adults and children. Sand filters can mainly be loaded with flint sand. Even though other elements such as active filter glass or hydro anthracite guarantee admirable outcomes.
This system allows an operation called the backwashing of the filter. By means of the manipulation of faucets, we are able to reverse the direction of circulation of the water in the filter and, with this, expel the matter retained in the filter into the drain. This operation is usually very easy to perform. To know when this backwash operation is necessary, a pressure gauge is installed in the filter that indicates when it should be done.
This above ground pool sand filter installation system lets a function called backwashing the filter. By manipulating the taps, we can turn around the direction of the water flow in the filter and thereby force out the substance to keep in the filter into the sap. This process is typically very easy to execute. To know when this backwash operation is necessary, a pressure gauge is installed in the filter that indicates when it should be prepared.
The pool pump
Pumps are a necessary part of swimming pool filtration systems. Most pumps are self-priming, which means they deliver water without user help when they start. The pumps can have different capacities, which must go through the filtration system depending on the size of the pool and the number of liters of water. This will conclude the electrical power of the pump to wish from.
The pool pump has a motor that runs at high speeds. At the other end is a turbine that is activated by the pump motor. The housing, also known as the vacuum chamber, is filled with water, creating a vacuum and allowing pool water to circulate.
The Krystal clear sand filter pump will work appropriately during normal maintenance. We point out earlier; the pool sand filter has a backwash function. Using certain buttons, the path of water circulation in the filter is overturned.
This is how it purifies water and removes all materials or dirt that it retains at the time of its function. The filter has a pressure gauge that indicates when backwash or related maintenance should be activated. The trigger is that this pressure increases.
Alternatively, the maintenance of the above ground pool sand filter will also depend on the use of the pool or the quantity of dirt it surrounds. Some live near trees, so they often gather lots of leaves. One more sign of maintenance by a pool sand filter is when the water in the pool does not have a very clean look.
After learning how does a pool sand filter works, it is possible to get a pool in the house with low maintenance costs. If you have a different type of, you can now make a choice whether or not to modify and you can check Intex Pools Sand Filter Pumps.
Related Articles -
how does a pool sand filter work, above ground pool sand filter, intex sand filter, intex pool pump filter,