|
In the ceramic ball mill valve, there is usually cast steel in some parts. The cast steel is one of the casting alloy and is can be divided into cast carbon steel, cast low alloy steel and cast special steel.
The cast carbon steel, which is with carbon as the main alloying element and little other element, is of high strength, plasticity, tenacity and low cost. The cast low alloy steel contains the alloy elements, such as manganese, chromium, copper, etc. this steel has high impact toughness, and has good usage property and long lifetime compared with the carbon steel. Besides, the cast special steel is used for the special demand, and it is the material for the wear-resisting fittings in mining machinery, engineering machinery, or the shell material for valves, pump, steam turbine, etc.
With these cast steels, Hongxing products high qualified valves. Hongxing ceramic contains carbon steel, stainless steel, and ceramic material. Usually the valve body is made of carbon and the lining is made of ceramic material. Thanks to the ceramic, Hongxing ceramic valve is more wear-resisting, heat-resisting, erosion-resisting, and has long lifetime.
DSMATERIAL ceramic valve is widely used in a lot of industrial fields, for example, chemical industry, petrochemical industry, power plant, etc. Therefore, the customers can own the full choice to choose the demand products.
This machine is a skeleton pattern ball mill with horizontal cylindrical turning gear, drive by outer gear and two hoppers. The material goes to the first hopper after the spiraling by the quill shaft from the feeding equipment. The hopper has ladder sheathing or corrugated sheathing with steel balls inside, which will fall under the effect of centrifugal force by barrel turning to ram hard and grind material. After the kibbling in the first hopper, by monolayer partition panel, the material will enter the second hopper, which has plane scale board with steel ball inside to grind material. The powder material will be discharged from the grid plate to finish the grinding.
The machine is composed by feeding part, discharging part, turning part and driving part (reducer, small driving gear, electric motor and electric control). The quill shaft adopts cast steel part and the liner is detachable. The turning gearwheel adopts casting hobbing process and the drum is equipped with wear-resistant liner, which has good wear-resistance. The machine is with stable and reliable working condition.
Moreover, according to different materials and discharging methods, there are dry ball mills and wet ball mills for choice. cement equipment : http://www.hxjq-crushers.com/5.htm
Vibrating screen : http://www.mine-crusher.com/7.htm
Related Articles -
business,
|
