|
Fabricating metals based on the specifications of clients is different from mass production process in large factories. Fabricated metal structures and components are typically done in relatively small shops. The process involves highly skilled labor and it is labor-intensive. However, the process of metal fabrication is also aided by machineries and power tools. The process is still labor-intensive despite of the use of power tools and machineries because of the need for meticulous attention to details and refinement. In most cases, the common power tools and shop machineries are sufficient for metal fabrication. This is despite of the fact that there is no universal set of standards that can be applied on all metal fabrication projects. It might be true that no set of universal metal fabrication standards can be applied but this does not necessarily mean that quality control is compromised. When it comes to mass production process, quality control is usually accomplished through sampling and on per batch basis. The sheer volume of items manufactured through mass production process makes it almost impossible to test every item. The sampling method on per batch basis is accurate enough to detect serious factory defects. An entire batch will be recalled either for repair or total replacement. The process of checking for quality is slightly different when it comes to small-scale production such as metal fabrication. When it comes to customized fabricated metal products, quality control can be done on per piece basis. The quality control process in metal fabrication can be done while the metal components and structures are being assembled. Metal fabrication always involves projects or structures that have specifications requested by clients. A lot of improvisations are sometimes necessary if the specified metal components or structures cannot easily be constructed from scratch. Nonetheless, it is absolutely necessary that the finished fabricated metal products adhere to the specifications of the clients. Regularly consulting the clients while the work is in progress is necessary especially if there are minor or major changer. Proper consultation with clients is crucial to prevent the final product from deviating too much from the specifications. This is especially true for fabricated metals that are parts of a larger structure. For example, the fabricated parts may be specific components of a vintage car being restored. Ensuring the quality of the product being fabricated is crucial in terms of aesthetic, structure and functionality. Customer satisfaction and quality control can only be achieved trough faithful adherence to the specifications. Nonetheless, there are some situations that major or minor deviations from the specifications to be made because of technical reasons. The client must concede and proper explanations for the needed changes must be thoroughly explained. The fabricator may suggest other more efficient configurations or more cost-effective materials. It is an integral component of ensuring quality control of the fabricated products. From simple structural support to complex mechanical components, quality control in metal fabrication is largely dependent on the skills and expertise of the fabricators. If you want to learn additional information about the topic discussed, simply follow this tcgindustries hyperlink. You can also find other related details by visiting this tcg blog post.
Related Articles -
metal fabrication, quality control, quality assurance,
|
