|
It is important to hire the best professional for installing heating system. An active solar space-heating system uses the same components as homeowner will find in most types of active Dayton heating installation. However, in a space- heating design, the components are connected to the heat distribution system in your home. That distribution system can include hydronic radiators or radiant floor heat in a concrete slab, or even a forced hot-air system (with the use of a liquid-to-air heat exchanger). But because the heating requirements of a space-heating system are far greater than for a solar space-heating system, larger collection and storage capacity needs to be designed into the system. As a consequence, most liquid active space-heating systems include two heat-storage tanks (or one very large tank). The first tank contains the heat exchanger that transfers heat from the antifreeze solution to the hot water. That hot water often flows into a second tank that may contain additional heat exchangers While using solar energy to heat residential living space is a viable strategy in most locations, it does have limitations. The most obvious is the impracticality of meeting 100 percent of the home’s heating needs with an active system. In virtually all cases, homeowner will need backup heat. In the solar industry, there are general guidelines about solar fraction—the portion of the heat that can be provided by a typical active solar heating system. The rule of thumb is that about 60 percent solar fraction is the cost-effective stopping point. After that, homeowner wants to use a supplemental heat source to fill in the rest. Solar space-heating system Importance In the winter, a solar space-heating system just can’t produce all the heat homeowner need. Ironically, the other major problem with an active solar space- heating system is that it produces too much heat in the summer. Think about it; homeowner has got all that hot summer sun striking the large solar array on the roof, producing hundreds of gallons of superhot water. But what can homeowner do with it? Homeowner certainly doesn’t want to heat the house in July. If homeowner can’t figure out a productive use for this hot water, then the only choice is to let the large, expensive solar heating system sit idle for much of the year. This is where a hybrid system comes in handy. It is important to hire the best Dayton heating installation contractor or professionals in the city after doing proper research and background check. Make sure to hire a licensed contractor. Author Resource: Dainy Morsen is conveying information about heating contractor Dayton visit here http://www.daytonheating.net/faq/
Related Articles -
Dayton, heating, installation,
| 
