|
Industrial Chillers are one of the most important equipment when it comes to manufacturing. They are important as they help in reducing production downtime as well as contamination in product quality. This is typically caused by a lot of heat in the application or process. Other than this, it safeguards the integrity of a process by removing excessive heat from applications and equipment that are quite sensitive to high temperatures. These include several industries such as plastics, food and beverage as well as printing. So, it is high time that you opt for the top industrial chiller manufacturer in India. Top Industrial Chiller Manufacturer in India – Things to keep in mind before you choose them Cooling Fluid When you are opting for a cooling fluid, look out about how it performs as well as compatibility with various equipment. The performance of a cooling fluid is based on the properties at a particular temperature such as viscosity, heat, boiling, and freezing points. So, when it comes to the compatibility of the equipment, look at the fluids and materials that are put into place. The reason is that seal degradation as well as corrosion tend to happen in systems that are sized incorrectly. Temperature of the Cooling Fluid The cooling capacity of the chiller is directly proportional to the temperature. Hence, there is a direct relationship between the temperature at which the chiller is being set as well as the cooling capacity. So, if the temperature is decreased, then the load would be increased on the refrigeration system. Pressure and Flow The performance and size of the pump are determined by the pressure loss of the system as well as the flow rate. Let us look about each of them in brief: - #Pressure To determine the loss of pressure, pressure gauges should be placed at the outlet and inlet of the process. After this, pump pressure needs to be applied such that values can be obtained at a certain flow rate. Consequently, if an undersized pump is used, then the fluid flow rate would be significantly reduced. Also, if the chiller has internal pressure relief, then the flow would be diverted and it goes back to the chiller. On the other hand, if internal pressure relief is not present, then the pump would try to provide the necessary pressure and perhaps run at limited pressure. So, in such a scenario, the life of the pump would be reduced significantly. Besides this, pump liquid would become hot and thus the ability of the pump to cool would be reduced significantly. At last, there would be excessive wear and tear to the seals, bearings as well as impellers. #Flow If the flow is inadequate, then proper heat transfer won’t be done. So, the flow won’t be able to remove the heat that is required for safe process operation. Operation You must know the condition of the site where the chiller would be operated. In this way, the best product fit for your process would be selected. Some of the things that you will need to consider are spatial components as well as ambient temperature. Size of the chiller Selecting the correct size of the chiller is very important. If a chiller is undersized, then always problems will be created. Thus, the process equipment won't be able to cool in the right way and thus water temperature won't be stable. On the other hand, if the chiller is oversized, then you won't be able to run in an efficient manner, and at the same time it would be quite costly to operate.
Related Articles -
brine chiller manufacturers, industrial chiller manufacturers, oil chiller manufacturers,
| 
