|
It is very common for homeowners and business owners to require some type of blasting service, which is necessary to clean off surfaces or big machines. For instance, many businesses would use sandblasting for heavy equipment cleaning, because they wanted to ensure their equipment was as clean as possible. But this type of heavy equipment blasting had a lot of consequences, which is why a new method has emerged as a much more suitable option. Dustless Blasting The concept of dustless blasting is to use a wet abrasive to get the job done. Instead of blasting with just a dry abrasive, the material is mixed with water to conduct heavy equipment cleaning and surface cleaning. The idea is that such water pressure coupled with the abrasive will clean off machines, remove paint and other materials from surfaces, and completely clean the desired area. But the question that many ask is whether dustless blasting is a true improvement on what sandblasting offers. The answer is yes. Less Dust One of the main reasons why customers would use dustless blasting for heavy equipment blasting and surface cleaning is because it produces 90 percent less dust than sandblasting. In the past, companies had an issue where they had to shut down an entire room or location for days because they were getting sandblasting done. The process itself took most of the day, and then it was necessary to close off the room for a couple days to allow the dust to clear and settle. Otherwise it was toxic for people to step inside and continue their work. That is not the case with dustless blasting. People can enter the room within an hour after the work is done and resume their duties. No Warping With many surfaces, such as the thin metal on certain machines, sandblasting had a warping issue. The problem was that because of the heat generated by the process, it was cleaning surfaces but also warping some of them. While companies wanted cleaner equipment and surfaces, they did not want their expensive machines warped by sandblasting. The good news is that such a problem does not exist with dustless blasting. The addition of water ensures that much less friction is taking place during the process. There is also much less heat making contact with the surface of the machine, floor or wall. So warping is not an issue. Rusting Precautions One concern with dustless blasting is that certain surfaces may develop rust because of how much water is being blasted onto them. But the best providers of the dustless blasting surface in the Melbourne area ensure that a rust inhibitor is added to the mixture. It ensures no rusting is caused by the process. Sometimes an extra rinsing with more of that material is done on surfaces that are more prone to rusting. Dustless blasting is a more affordable, environmentally friendly and less disruptive process compared to sandblasting. It is the ideal solution for surface and heavy equipment cleaning for homes, businesses and industrial locations.
Related Articles -
sand blasting Melbourne, surface cleaning and preparation,
| 
