|
In the United States, there is an increasing number of teenagers and adults wearing braces. This means that these people are more concerned about the alignment of their teeth more than anyone else. Orthodontic or dental braces are devices used to realign crooked teeth and correct bite problems. Typical dental braces are made of lightweight metals such as silver, gold, and titanium or ceramic and plastic alloys. Although braces can be of various types depending on the material of which they are made, all of them have three common parts: brackets, metal wires, and elastic bands. These parts are put on teeth through a process which includes preparation, application, wiring, and aftercare. During preparation, the teeth are brushed with a special type of polish. In most cases, a lip stretcher is placed in the patient’s mouth to keep lips and tongue from touching the teeth. A dental vacuum is also placed in the mouth to eliminate the production of too much saliva that can ruin the adhesive. The teeth will then be applied with enamel conditioner and dried through the use of an air prophy jet or dental blow dryer. Application starts by bracing one tooth at a time. A metal bracket is placed on each tooth using dental cement. Every metal bracket placed on a tooth must be secured with an ultraviolet curing light. Such curing light is responsible for activating the adhesive and helps the cement bond to the tooth. Brackets used in applying braces tucson come in different colors such as silver and gold. Once all brackets are in place, wiring can now be done. A nickel-titanium archwire is used like a thread to connect each bracket. Such wire is shaped depending on the shape of the patient’s mouth and secured to an effective position. Elastic ties are placed to each bracket in order to keep the wire in place. Elastics for braces tucson also come in different colors, strengths, and sizes. After braces tucson are placed, patients are most likely going to experience sores which should only last for a week. Monthly appointments will be required by dentists to assess the progress of the braces and to tighten the wires. Pressure is increased whenever wires are tightened, causing the teeth to be moved to the desired position.
Related Articles -
braces, tucson,
| 
