LED lamp belt refers to assembly LED in banded flexible circuit board or on the PCB board. It earns the name because its shape likes a ribbon. Because of its long service life,(normal life in 8 ~ 100000 hours), and environmental protection, gradually become emerging in all sorts of adornment industry. Nowadays, more and more people love to use LED lights belt, below let me introduce the simple installation method of LED lights belt. When it used in interior decoration, LED lamp belt don't have to withstand the wind and rain, so the installation is very simple. Outdoor installation that can withstand wind and rain, if use 3 m glue fixed for a long period of time, can cause adhesive of 3 m reduce and the LED lights fall off. So the outdoor installation card slot is often used to fixed way. Places where need to cut and connect, do as well as indoor installation. You just need to additionally equip with waterproof glue to consolidate the join points of the waterproof effect. Precautions for wholesale Led bulbs belt. Now there are a lot of customers demanding LED lamp belts which are not conventional specifications, but need to customize. But because we are not familiar with some technical parameters of LED lights, thus a lot are obviously do not meeting technical requirements. And even make it, its use will be affected. Here special talk about three special customized LED lights considerations, for wholesale Led bulbs customer reference: Special attentions: A. if not article 220 v lamp, please do not directly use AC220V lights; B. don't pick up the negative while mistake for positive. C. workers wear electrostatic ring on the homework. Finally is to describe the controller connection mode in detail. Run LED lantern and RGB lights should use controller to implement all changes effect. Each controller controls different distance. In general, a simple controller control distance is 10 to 15 meters, remote controller in the control range of 15 to 20 meters, however, the longest can control to 30 meters distance. If the connection distance of LED light is longer, and the controller can not control so long lamp tape, you will need to use power amplifier for tapping. In the actual operation process, you must pay attention to connection distance of the LED lamp. Generally speaking, the 3528 series of LED lights belt, its connection distance up to 20 meters, the 5050 series of LED lights belt, connection longest distance of 15 meters. If this connection is beyond the distance, the LED lamp belt is easy to fever. In use process will affect the service life of LED lamp belt. Therefore, when installation must be in accordance with the requirements of the factory,avoiding letting LED lights take overload operation.
Related Articles -
wholesale Led bulbs, LED lamp,
|