PRV Chicago Blower Canada Power Roof Ventilators provide clear evidence of the continued leadership of Canada Blower in the area of ventilating fan packages for industrial and commercial ventilation. Canada Blower supplies axail hooded fans covering sizea ranging from 12" to 120" wheel diameters with capacities from 2000 CFM to 200,000 CFM, and heating capacity up to 4,500,000 BTU/hr. |
Chicago Blower Axial Exhaust Power Roof Ventilators are factory assembled package units constructed to withstand hurricane winds. Its construction incorporates mushroom head, or hood head with bird screen, which is hinged to a box-style stack, supplied with access door. For higher capacities stack can be substituted with tubeaxial, or vaneaxial fan. Curb caps are welded to the curb side of the stack. Fan panel assembly is located near the top. Back-draft stack dampers are standard option. Disconnect safety switch is mandatory for roof mounted units.
Axial Supply Chicago Blower Hooded Power Roof Ventilators are offered with optional filter rack and filter package protected by bird and insect screen. Motorized back draft dampers are standard on all supply air fans. Filtered mushroom head features channel type filter racks, bird screen, hinged connection to the stack box. Special coatings are available upon request.. Fan panel is of double orifice design to allow for supply/exhaust, or reverse-flow operation. Discharge diffusers are available in variety of styles.
An exhaust fan is a mechanical ventilation device that helps to draw out stale and impure air from your home and bring in fresh air, thereby improving the quality of indoor air. Exhaust fans are typically ducted to the exteriors of your house, through which bad indoor air can effectively be removed from your living space.
Exhaust fans are very effective at any building ventilation. Without proper ventilation, the air inside your home can get filled with harmful contaminants and disease causing pathogens.
Chicago Blower Make-Up Air Roof Ventilators are available with direct gas fired heater, or steam/hot water coil packages. Seven arangements are available for efficient control of the air flow in various modes on operation: fresh air /return air /by-passs air, in various mounting arrangements.
FRP Construction - Fiber Reinforced Polyester corrosion resistant construction is available for all Chicago Blower hooded power roof ventilators along with protective coatings for corrosive exhaust fumes, or atmosphere, including synthetic vinyl plastic and cathalytic epoxy coatings.
Corrosion resistant construction and chemical duty construction: for corrosive environment all fans are avaialble in 304 SS, 316 SS, or 316 L stainless steel construction. Spark resistant construction is available in all aluminum construction; Chicago Blower wheels are made of special alloys for non-sparking airtsream construction.
For additional information please refer to http://chicagoblowercanada.com/hoodedfans.html.
Chicago Blower Industrial Ventilating Engineeers Chicago Blower Canada Co. http://www.chicagoblowercanada.com/MakeUpAirFans.html http://www.chicagoblowercanada.com/fanaccessories.html
Related Articles -
fan, ventilator, blower, exhaust, supply, filtered, axial, hooded, upbalst, downblast, skyvent, Power Roof Ventilator, wall fan, wall propeller fan, pr,