Cost Prices of solid wood products fluctuate widely fr om day to day. Historically, alternative wood products have been a little more expensive than cedar, redwood, or treated lumber. Recently, however, the cost of virgin wood products has risen considerably, and the cost of plastic and composite lumber continues to become more competitive as demand for them increases. The cost of a single annual refinishing (cleaning and resealing) of a wood deck usually equals the added cost of purchasing plastic lumber over lower-cost treated lumber.Environmentally Friendly Flooring Installation Plastic and wood composite decking materials are available in a wide range of colors and textures to complement any home’s exterior. It can be installed using common carpentry tools and will cut, drill, and rout cleanly since there is no grain to split or chip. Generally, both screws and nails with a galvanized coating are accept able fasteners, although screws are generally preferred. composite decking outdoor porch Plastic and wood composite lumber should not be used as a structural component such as a support post, joist, or stringer unless it has been engineered for a specific application. The 100% plastic lumber does have a high coefficient of expansion and must be considered in the design. For most residential applications, plastic lumber will require joist spacing similar to traditional lumber. When using 5/4” x 6” or 2” x 6” decking boards, the joist spacing should be 16” on center. However, some manufacturers have products that allow for longer spans. Carefully follow the recommendations of each manufacturer before purchasing and installing any product.outdoor composite wood floor Maintenance Many manufacturers recommend periodically sw eeping and hosing the deck and occasionally cleaning the deck with conventional deck wa shes or detergents. If need be, the deck can be sanded down to remove scratches. Most recycled plastic and wood composite lumber is ultraviolet light (UV) stabilized to resist sunli ght damage, though colors generally fade slightly during an initial weathering phase. Most manufactu rers offer a limited lifetime guarantee and will replace any pieces that crack, warp, or break.wood plastic composite underground Other Data / Comments For some people, the darker colors of plastic and wood composite lumber, as well as natural wood, can become uncomfortably hot in direct sun. Generally, the darker and denser the material, the more heat it will retain. If possible , test the different surf aces when the sun is overhead before choosing a color.composite lumber suppliers
Related Articles -
Wood, Plastic, Composites,
|